Overview
The Smittybilt D0989QC-SS is a polished stainless nerf step set for the Dodge Ram 1500 from 2009 to 2016. It fits the 2009 and 2010 Ram 1500 in Laramie, SLT, ST, Sport, TRX and TRX4 versions, and the 2011 to 2016 Ram 1500 in Big Horn, Express, Laramie, Lone Star, Outdoorsman, SLT, ST, Sport and Tradesman versions.
The steps are sized wheel to wheel and built on a 3-inch main tube with a drop-down design and cleated step plates. The unit is rated for loads of up to 445 pounds. The step plates give a firm surface to climb onto when getting in and out of a raised cab.
The steps are one piece and bolt to the frame, with no bracket assembly before fitting. They help protect the rocker panels from damage, which is their main job on a truck with a high ride height.
Key features
- Polished stainless steel finish
- Wheel-to-wheel length
- Four or six step drop-down design
- Three-inch main tube
- Cleated step plates for stability
- Rated for loads of up to 445 pounds
- One-piece frame-bolt design
- Helps protect the rocker panels
Fitment across model years
Ram 1500 trucks changed across the 2009 to 2016 range, so both trim and year matter when buying a nerf step. Check the door sticker or registration to confirm the model year and trim before ordering, since body and mounting details can differ between generations.
Once the fit is confirmed, look at how the step will sit against the rocker panel and the tires. A drop-down step with cleated plates adds footing, but it also adds a low point that can catch on rocks. Bolts should be checked after the first drives, and the frame contact points should be kept clean.
- Confirm model year and trim before buying
- Check rocker panel and tire clearance
- Keep frame contact points clean
- Recheck fasteners after the first drives
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | D0989QC-SS |
| Finish | Polished stainless steel |
| Length | Wheel to wheel |
| Main tube | 3 inches |
| Step design | Four or six step drop-down with cleated plates |
| Load rating | Up to 445 pounds |
| Installation | One-piece unit bolts to frame |
Vehicle fitment
This nerf step fits the 2009 to 2010 Dodge Ram 1500 in Laramie, SLT, ST, Sport, TRX and TRX4 versions, and the 2011 to 2016 Ram 1500 in Big Horn, Express, Laramie, Lone Star, Outdoorsman, SLT, ST, Sport and Tradesman versions.
The Ram 2500 and 3500, the 2017 and later Ram 1500 and the 2001 to 2008 Ram models are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The nerf step unit.









