Tire carriers move the spare off the ground and out of the cargo area, usually by mounting to the tailgate, rear bumper or bed. This category includes swing-out carriers, bumper-integrated designs, base plates and related brackets from Smittybilt, Rock Hard 4×4 Parts, Wilco Offroad and Rugged Ridge. Compare mounting style, tire size and vehicle fit, then compare the products below.
Tire Carriers
Showing 1–12 of 71 resultsSorted by popularity
-
-
Tire Carriers
Wilco OffRoad Hitch-Gate Accessory Mount Kit HAT2000-GK
- Wilco Offroad HAT2000-GK hitch-gate accessory mount kit
- Support bar mounts to hitch-gate tire mount bushings
- 2 jerry can trays and 2 jerry can straps with ratcheting mechanism
- All necessary hardware included; no jerry cans in the kit
SKU: WORHAT2000-GK -
Tire Carriers
Warn Rock Crawler Tire Carrier – 64337
- Warn 64337 Rock Crawler tire carrier with a black powder coat finish
- Lists fit for 1987–1995 YJ, 1997–2006 TJ and 2004–2006 LJ Wranglers
- 1.5 inch solid steel pivot shaft, welded rather than bolted
- Mounts to the WARN Tire Carrier bumper, sold separately
- Includes frame-reinforcing brackets and a polyurethane pad
SKU: WAR64337 -
Tire Carriers
Warn Rock Crawler Tire Carrier – 63253
- Warn 63253 Rock Crawler tire carrier with a black powder coat finish
- Lists fit for 1976–1983 Jeep CJ5 and 1976–1986 Jeep CJ7
- 1.5 inch solid steel pivot shaft, welded rather than bolted
- Mounts to the WARN Tire Carrier bumper, sold separately
- Includes frame-reinforcing brackets and a polyurethane pad
SKU: WAR63253 -
Tire Carriers
TeraFlex Heavy-Duty Hinged Carrier and Adjustable Spare Tire Mounting Kit – 4838150
- TeraFlex 4838150 hinged tire carrier and tailgate reinforcement kit for Jeep vehicles
- Holds a spare tire up to 37 inch
- Mounts to the factory tailgate hinge points with no drilling required
- Cast A356.2 T6 aluminum main component with forged steel hinge brackets
- Threaded holes for fuel cans and a recovery jack; fitment not listed
SKU: TER4838150 -
Tire Carriers
TeraFlex Heavy-Duty Hinged Tire Carrier – 4838100
- TeraFlex 4838100 hinged tire carrier for 2 and 4-door Jeep models
- Holds a spare tire up to 37 inch, mounted at the factory tailgate hinge points
- Cast A356.2 T6 aluminum carrier, no drilling required
- Includes spacers, installation hardware and installation instructions
- Threaded holes for fuel cans and a recovery jack
SKU: TER4838100 -
Tire Carriers
Smittybilt XRC Tire Carrier (Tan) – 76857TAN
- Tan tire carrier for Smittybilt Gen2 XRC and SRC bumpers
- Fits 2007 to 2018 Jeep Wrangler JK, 2-door and 4-door
- Two-stage textured tan finish over 3/16 inch cold-rolled steel
- Includes Roto Pax and CB antenna mounts
- Part 76857-01 required with non-Smittybilt bumpers
SKU: S/B76857TAN -
-
-
-
-
Tire Carriers
Rugged Ridge Spartacus Heavy-Duty Tire Carrier Wheel Mount – 11546.62
- Spartacus HD tire carrier wheel mount, part number 11546.62
- Powder coated carbon steel, repositions the spare tire
- Fitted for 5 on 4.5 and 5 on 5.5-inch bolt patterns
- Retains the factory high-mount brake light
SKU: RUG11546.62
Why add a tire carrier
A larger tire than stock often will not fit on the factory spare mount, and a heavy spare can strain the tailgate. A dedicated carrier moves that load to the frame or bumper, frees cargo space and can double as a platform for accessories. Many owners also fit a carrier when they build a custom rear bumper.
Carrier styles
- Tailgate-mounted: Bolts to the tailgate, often with a reinforcement plate. It is simple, but heavy tires can stress hinges, so check the recommended tire size.
- Bumper-mounted swing-out: Attaches to the rear bumper or frame and swings on a hinge, which takes the weight off the tailgate.
- Base plates and tabs: Welded or bolted brackets that let a fabricator or kit add a carrier to a bumper.
- Bed-mounted: Found on pickups, using bed rails or a cross member as the anchor point.
What to compare
Look at the maximum tire diameter and weight the carrier is designed for, the material and thickness of the steel, and the finish. Bare steel needs paint or powder coat before use. Check whether the carrier works with the factory backup camera, a third brake light or a license plate relocation, since some designs need a separate bracket. Many accessories in this category, such as camera brackets and rapid straps, are made for particular models and body styles.
Fitment and installation
Vehicle details such as body lift height, two-door or four-door body style and model year change bolt patterns and clearances, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. A loaded carrier adds a lot of weight at the rear, so torque all fasteners to specification, use thread locker where called for, and recheck them after trail use. Rattles and cracked welds usually start at loose mounts. If you need to weld or drill structural parts, use a qualified shop.
Think about how the carrier will be used on the trail. A spare mounted high and far back changes how the vehicle behaves on steep departures, and a very heavy tire can make the rear feel top-heavy. Securing the spare with a locking hardware or a lug nut lock deters theft, and a cover protects the tire from sun damage.
Common pairings and mistakes
Carriers often pair with a heavy-duty rear bumper, a backup camera bracket, a third brake light relocation and a latch or hinge upgrade. If you build the combination in stages, confirm that each piece uses the same mounting points, because two accessories sometimes want the same bolt holes.
- Do not mount a very large tire on a stock tailgate without reinforcement.
- Do not forget to check the swing clearance against walls, trees and tow hitch accessories.
- Do not skip lug-nut or spare-wheel securing hardware, since a spare can loosen over rough roads.
Weigh the finished spare and wheel if you can. A 35 inch tire on a steel wheel can weigh well over 80 pounds, which strains hinges and latches designed for far less.
Popular Tire Carriers brands
- Smittybilt (9)
- Rock Hard 4x4 Parts (7)
- Wilco Offroad (7)
- JcrOffroad (6)
- Rugged Ridge (6)
- Nfab (5)
- ARB 4x4 Accessories (5)
- Fab Fours (4)
- Addictive Desert Designs (3)
- Body Armor 4x4 (3)
- Crown Automotive (3)
- Poison Spyder Customs (3)
Tire Carriers FAQ
Will a tire carrier fit my wheel and tire size?
Each carrier lists a maximum tire diameter and weight. Check these against your actual tire and wheel, including any wheel cover, and confirm fitment for your vehicle with the manufacturer's specifications.
Is a bumper-mounted carrier better than a tailgate carrier?
A bumper or frame mount carries the weight on structural parts, which is easier on hinges, especially with big tires. A tailgate mount can be simpler and lighter, but it depends on the tailgate's strength.
Do I need to powder coat a bare steel carrier?
Yes, if it ships as bare steel. Raw steel rusts quickly, so paint or powder coat it before installation, and touch up any chips. Pre-finished carriers still benefit from occasional inspection.
Can a tire carrier block my backup camera?
It can. Many carriers are designed to keep the factory camera usable, and some need a separate relocation bracket. Check the product details for camera compatibility before choosing.










