Overview
The Smittybilt XRC Rock Crawler Winch Front Bumper with Grille Guard and D-ring Mounts, part number S/B76801, is a full-width steel front bumper for the 1987–1995 Jeep Wrangler (YJ). It is winch compatible and includes D-ring mounts. The title also names a grille guard.
The XRC bumpers have high approach angles and raised corners for ground clearance. The bumper is made from 3/16 inch cold rolled steel, robotically welded, with the welds ground down and smoothed before a two-stage textured matte black powder coat. Each bumper is a complete bolt-on and needs no modifications to the vehicle.
Key features
- High approach angles and raised corners for ground clearance
- Solid mount D-rings welded on the inside and outside
- Front stinger made from 1.75 inch tubing with light tabs
- Winch mount for up to a 10,000 lb winch, with an aluminum or roller fairlead option
Matching winch and recovery gear
A winch mount is only one part of a recovery setup. The winch, fairlead, cable or synthetic rope, and recovery shackles all need to match the load the bumper is expected to carry. Check that the winch’s rated capacity is within the mount’s range before bolting it on, and look at the frame area that will take the load.
Bumpers of this type carry a lot of leverage during winching, so inspect the bolts, the D-ring welds and the mounting brackets after the first few recovery runs. Look for cracked paint at the welds, loose hardware or movement at the mounts. Keep the fairlead aligned with the winch drum so the rope spools evenly, and replace worn rope or damaged hardware rather than reusing it. The stinger and light tabs should also be checked for vibration on rough trails.
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | S/B76801 |
| Position | Front |
| Width | Full |
| Material | Steel, 3/16 inch cold rolled |
| Finish | Two-stage textured matte black powder coat |
| Winch mount | Compatible, up to 10,000 lb winch |
| D-ring mounts | Included, welded inside and out |
| Light mounts | Included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ).
The list does not include the CJ models, the Wrangler TJ, LJ, JK or JL, or any model year after 1995. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a complete bolt-on and needs no modifications to the vehicle. The stinger has two light tabs, so confirm the tabs suit the lights you plan to use.
What’s included
The front bumper with the stinger, D-ring mounts and light mounts. The stinger has two light tabs, and the bumper is winch compatible with the D-ring mounts welded inside and out.
Not included: The front bumper is the only piece covered here. Check the package contents against your installation before starting, since a rear bumper with a 2-inch receiver hitch and a tire carrier for 31 to 40 inch tires are separate items.

















