Overview
The 76651-02 is a tire carrier built for the SRC rear bumper, to hold an oversized spare tire. It is the carrier only. Part 76651-01 is needed to mount it, and that part is not included.
The carrier is made from 1/4-inch steel plate. It uses a three-point tire mounting system for oversized tires, a heavy-duty latch to keep the tire secure, and a custom grease fitting on the hinge to keep it clean and smooth.
Carrier care and rear weight
A tire carrier moves weight to the rear of the vehicle and adds leverage on the bumper. Before a large spare goes on, make sure the rear suspension, shocks and tires are in good condition. A heavy tire swinging on a hinge puts repeated stress on the mounting points, so look them over regularly.
The hinge and latch do most of the work. Keep the hinge clean, grease it at regular intervals and check that the latch still closes firmly. Sand or road grit can wear the pivot, so cleaning after off-road trips helps. Check the tire pressure and mounting bolts before each long trip.
- Grease the hinge at regular intervals
- Check the latch closes firmly
- Inspect the bumper mounts for wear
- Keep the spare within the maximum tire size
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76651-02 |
| Finish | Black textured |
| Construction | 1/4-inch steel plate |
| Undercoat | Zinc |
| Powder coat | Dual-stage textured |
| Tire maximum | 37/12.50 |
| Mounting | No-drill, bumper mount |
| Requires | Part 76651-01 to be mounted |
| Fitment | Direct fit to the bumper mount |
Vehicle fitment
No vehicle is named for this carrier. It mounts to the SRC rear bumper, and Smittybilt labels the fit as direct to the bumper mount.
The carrier is for the SRC rear bumper only, and the bumper part 76651-01 must be in place before it mounts.
Installation notes
The carrier installs without drilling. Its three-point mount is built for oversized tires, and the 37/12.50 maximum applies. Use the grease fitting on the hinge to keep it smooth.
What’s included
The tire carrier only. Not included: part 76651-01 needed to mount the carrier, and the spare tire.






























