The first SUV wasn't a Jeep. See how the International Harvester Scout 80 came to be, how the Scout 800 and Scout II followed,…
Fender Flares
Fender Flares cover the wheel openings on trucks and Jeeps to catch mud and rocks, and to make room for wider tires. Bushwacker is the largest brand here, alongside Crown Automotive, Smittybilt, Omix-Ada and Fab Fours. Styles include pocket, rivet, cut-out, extend-a-fender and OE looks in paintable or black finishes. Check each product page, then compare the products below.

Bigger tires usually stick out past the body, and flares are what bring the coverage back. They keep rock spray off your paint and the cars behind you, and they let a lifted Jeep or truck run wider wheels without looking unfinished. Steel tube flares and full replacement fenders go further and open up the wheel well.
Nearly every listing is a flare itself, sold as a full four-piece set, a front or rear pair, or a single corner. Plastic sets come textured black or painted to a factory color code. The hardware group holds the retainers, clips, push pins and nuts that break during removal, many matched to older Cherokee and Wrangler part numbers. Edge trim and gimps finish the gap between flare and body.
Shop flares, hardware and trim
Popular fender flares
-
Fender Flares
Smittybilt YJ Wrangler Fender Flare Set (Paintable) – 17191
- Smittybilt fender flare set, part number 17191, paintable
- Four pieces for the front and rear, with 6 inches of coverage
- Textured, UV stable ABS plastic in black
- Drilling required; minimal drilling may be needed for a proper fit
- Fits the YJ chassis: Jeep Wrangler, 1987 to 1995
SKU: S/B17191 -
Fender Flares
Smittybilt TJ Wrangler Fender Flare Set (Paintable) – 17190
- Fits the 1997–2006 Jeep Wrangler TJ, based on the product title
- Four-piece set with 6 in of coverage at the front and rear
- Black textured, UV stable ABS plastic that can be painted before installation
- Bolt-on installation, with minimal drilling possibly needed
SKU: S/B17190 -
Fender Flares
Fab Fours Open Fender Base System without Flare (Black) – TF4100-1
- Fab Fours TF4100-1 open fender base system without flare, front, black
- Fits 2017–2018 Ford F-250 and F-350 Super Duty
- Designed for 40-inch tires with a leveling kit
- Includes inner fender, templates and installation manual
SKU: FFITF4100-1 -
Fender flare coverage and hardware
Coverage figures vary by how each maker measures them, so compare flares from the same brand when you can. Examples below come from listed products.
Coverage examples
| Flare | Coverage stated | |
|---|---|---|
| Bushwacker Extend-A-Fender (Ford) | Front and rear set | 1.75" of width |
| Bushwacker Max Coverage (Ford) | Set of four, no drilling | 2" of width |
| Smittybilt M1 (Super Duty) | Front and rear, bolt-on | Up to 2" |
| Bushwacker Pocket Style JK rear | Rear pair | Up to 4.75" |
| Smittybilt YJ / TJ sets | Four-piece ABS | 6" |
| Bushwacker Max Coverage JK front | Front pair | Up to 11.75" |
Paint-matched sets
| Ford Ingot Silver | Paint code UX |
|---|---|
| Ford Magnetic | Paint code J7 |
| Chevrolet Silver Ice Metallic | Paint code GAN |
| Where to find your code | Door jamb label; GM often in the glove box |
| Paintable black | Scuff and prime before color |
Steel flare and fender specs
- Fab Fours JK replacement fenders: 11 gauge body, removable 16 gauge skin
- Smittybilt XRC Flux: 1.5" CNC-bent tube with 1/8" laser-cut sheet
- Smittybilt XRC JK set: all-steel, powder coated, front and rear
- Replacement fenders often need the factory fender and flare removed
- Steel fenders add weight at the corners; plan for it on light rigs
Flare construction compared
| Molded plastic | Steel tube or plate | |
|---|---|---|
| Typical material | UV-stable ABS or TPO | Powder-coated steel |
| Finish | Textured black or paint code | Matte or satin black |
| Mounting | Factory holes, clips, some drilling | Bolt-on, often with fender trimming |
| Trail damage | Flexes back from light hits | Takes hits, can dent |
| Tire clearance | Follows the stock arch | High arch or open design |
Hardware kits by Jeep model
| Cherokee XJ 1984–1994 | Kit: 2 U-clip nuts, 14 push-ins, 18 nuts, 12 screws |
|---|---|
| Cherokee XJ 1984–1996 | Retainer brackets sold per position |
| Cherokee XJ 1997–2001 | Rear fender front retainers, left and right |
| Wrangler YJ 1987–1995 | Front kit: 16 screws and 16 nuts |
| Wrangler TJ 1997–2006 | Kit 4918K for the 55254918K flare family |
| Liberty KK 2008–2011 | Molding push pins |
Plastic flares and clips get brittle with age and cold. Order spare retainers before removing old flares, and confirm the rear set matches your bed length or body style.
All Fender Flares 527 parts
-
Fender Flares
Smittybilt TJ Wrangler 6 Inch Front Fender Flare (Paintable) – 17190-01
- Fits the 1997–2006 Jeep Wrangler TJ
- Driver-side front position; 6-inch extra-wide flare with 6 inches of coverage
- Textured, UV-stable ABS plastic, paintable
- Minimal drilling required; part number 17190-01
SKU: S/B17190-01 -
Fender Flares
Bushwacker Dodge RAM OE Style Fender Flare Set (Paintable) – 50920-02
- OE-style fender flare set for Dodge RAM trucks, front and rear, paintable
- Up to 0.50 inch of tire coverage from debris
- Installs with no drilling; OEM matte black smooth finish
- Front pair 50049-02 and rear pair 50040-02 listed separately; does not fit the R/T model
SKU: B/W50920-02 -
-
Fender Flares
Smittybilt M1 Color-Matched Fender Flares (Shadow Black) – 17397-G1
- Smittybilt M1 color-matched fender flares in Shadow Black, part number 17397-G1
- Set of four, 2 inch coverage, front and rear
- OEM quality ABS, heat resistant and UV stable
- No drilling; hardware and gaskets preinstalled
SKU: S/B17397-G1 -
Fender Flares
Smittybilt M1 Color-Matched Fender Flares (Black) – 17291-GBA
- Smittybilt M1 color-matched fender flares in black, part number 17291-GBA
- Set of four, 2 inch coverage, front and rear
- OEM quality ABS, heat resistant and UV stable
- No drilling; hardware, gaskets and bolt kit preinstalled
SKU: S/B17291-GBA -
-
-
Fender Flares
Rugged Ridge Rear Steel Tube Fender Flares (Matte Black) – 11615.47
- Fits 2007–2018 Jeep Wrangler JK 2-door and Unlimited 4-door models
- Rear position, sold in pairs
- Steel tube design with matte black finish
- Bolt-on installation with included hardware, no drilling or cutting required
- Part number RUG11615.47 from Rugged Ridge
SKU: RUG11615.47 -
Fender Flares
Rough Country Ram Pocket Fender Flares with Rivets (Black) – F-D10914
- Rough Country pocket fender flares with rivets, part number R/CF-D10914
- Direct fit for the 2019–2026 Ram 1500 across its trims, including Big Horn, Laramie and TRX
- Set of four, 2-inch width/coverage for front and rear
- Black, UV treated, can be painted to match
SKU: R/CF-D10914 -
Fender Flares
Rough Country Nissan Pocket Fender Flares with Rivets (Black) – F-N101700
- Rough Country pocket fender flares with rivets, part number R/CF-N101700
- Direct fit for the 2017–2021 Nissan Titan in PRO-4X, Platinum Reserve, S, SL and SV trims
- Set of four, 1.75-inch width/coverage for front and rear
- Black, UV treated, can be repainted
SKU: R/CF-N101700
What fender flares do
Fender flares extend the body line around each wheel opening. They help block mud, water and small rocks thrown up by the tires, and many regions require adequate tire coverage by law. They also add clearance for wider tires or a lift.
The category includes full flare sets, trim pieces and hardware kits.
Styles
- Pocket style flares have bolt-like rivet details and a dramatic profile.
- Extend-a-fender designs add moderate extra coverage for larger tires.
- OE style flares mimic the factory look.
- Cut-out flares are made for trucks with a specific bed or fender shape.
- Tube or diamond plate styles offer a rugged look for trail vehicles.
Choosing a set
Start with coverage. Measure your tire width and offset to be sure the flares cover the tread, and take lift height and wheel spacers into account. Check how much wider the flare extends beyond the body and whether front and rear sets are listed together.
Confirm fitment for your exact year, make and model, because fender shapes vary within generations. Check the material, usually a durable plastic or ABS, and whether it is paintable or comes in a textured black finish. Matching the paint is a job for a body shop or careful DIY work.
Installation and legal points
Installation methods include bolt-on rivet hardware, clips and adhesive tape. Some designs need holes drilled in the fender or removal of factory trim. Test fit before drilling or painting. Warm the plastic in cool weather so it follows the curve of the fender without cracking.
Tire coverage and fender requirements differ by state, and wider tires may require flares. Check local regulations. Clean the body surfaces well and seal drilled holes against rust. If you use a lift or tires beyond stock size, confirm clearance at full steering lock and suspension compression.
Further checks and care
Questions to ask before you choose
Think about the width of your tires, the wheel offset and whether you plan to change either. Decide whether you want a factory-like look or a bold one. Ask if you will paint the flares and how long the prep work might take. Finally, check whether hardware is included and whether the flare shape suits the mud and snow conditions where you drive.
Measuring and confirming fitment
Compare the flare's dimensions with your wheel opening, including the arch curve and the bolt or rivet pattern. Note the cab and bed style, because short-bed and long-bed trucks use different rear flares. Measure how far the tire edge extends beyond the body at full compression and when the wheel turns, since that defines the width needed. Check whether the flare covers factory molding or requires its removal.
Materials and care
Most flares use molded thermoplastic such as ABS or TPO, designed to flex and resist cracking. Some use aluminum or steel for a rugged look. UV-stabilized plastic keeps its color longer. Wash around the edges to clear grit trapped behind the flare, and re-tighten fasteners occasionally. Inspect adhesive tape and clips for lifting, and treat exposed holes in the fender with touch-up paint or sealer to stop rust.
Related guides
- First SUV: The International Harvester Scout 80 Story
Popular Fender Flares brands
- Bushwacker (332)
- Crown Automotive (55)
- Smittybilt (36)
- Omix-Ada (30)
- Fab Fours (20)
- Rugged Ridge (17)
- Lund (16)
- Xenon (7)
- JcrOffroad (6)
- MCE Fenders (6)
- Warrior (6)
- Rough Country (6)
Fender Flares FAQ
Do I need fender flares for bigger tires?
Often yes. Bigger or wider tires can stick out past the body, which throws more debris and may violate local coverage rules. Flares restore coverage, though they do not create clearance inside the wheel well.
Can fender flares be painted to match my vehicle?
Paintable versions can be painted with a primer and color-matched paint suited to the material. Textured black flares are usually left as they are. Prepare the surface and follow the manufacturer's guidance.
Will fender flares fit if I have a lift kit?
They can, but lift height and wheel offset determine the coverage you need. Check the flare's size against your tire and wheel setup, and confirm fitment for your exact vehicle.






















