Overview
The Smittybilt GEN2WINPAK1 is a recovery winch PAK built around the XRC 9.5 GEN2, rated for 9,500 lb. Smittybilt’s XRC series runs from 9,500 lb to 17,500 lb capacity, and this PAK is the entry point with a winch plate and accessory kit.
The winch uses a series-wound 6.6 hp motor with a three-stage planetary gear system and revised gear ratios for more pulling power and faster line speed. Smittybilt finishes the body in a UV-resistant matte black coating with stainless steel hardware and oversized aluminum crossbars.
Each XRC winch comes with a heavy-duty winch controller, a four-way roller fairlead, a forged steel tow hook and a solenoid box that can be mounted in three positions. For a synthetic rope version, Smittybilt points buyers to its XRC Comp Series.
The PAK’s winch plate is 3/8 inch steel, powder coated for corrosion resistance. The winch is a complete recovery system built to hold up over repeated use.
Key features
- 9,500 lb rated capacity in the XRC GEN2 range
- Series-wound 6.6 hp motor
- Three-stage planetary gear system with revised ratios
- Four-way roller fairlead and forged steel tow hook
- Solenoid box mountable in three positions
- UV-resistant matte black finish with stainless hardware
Frame cover and mounting prep
Before the plate goes on, lay out every bolt, washer and spacer and compare them with the mounting instructions for your bumper. Removing the front cover and checking the frame rails gives you a clear view of the mounting points and shows whether any trim needs to be relieved for clearance.
A winch plate changes how the front of the vehicle carries load, so torque every fastener to the specified value and recheck the bolts after the first few recovery runs. Steel plates can flex slightly under shock loads, and loose hardware is the most common cause of a rattling or shifting mount.
Keep the winch controller and leads away from the frame cover edges, and route them where they will not rub when the suspension articulates.
- Lay out all hardware before starting
- Recheck plate bolts after the first few trail runs
- Keep leads clear of sharp frame edges
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | GEN2WINPAK1 |
| Winch capacity | 9,500 lb |
| Motor | 6.6 hp, series wound |
| Gear system | Three-stage planetary |
| Fairlead | Four-way roller |
| Tow hook | Forged steel |
| Finish | UV-resistant matte black, stainless steel hardware, aluminum crossbars |
| Winch plate | 3/8 in. steel, powder coated |
Vehicle fitment
The Smittybilt Winch Plate is made specifically for the 2007 to 2011 JK Wrangler, which is the Jeep Wrangler JK built from 2007 to 2011. The plate is designed to work with the factory bumper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The winch plate needs a small modification to the frame cover for installation, so plan for that before mounting. Keep hands and clothing clear of the rope and the hook whenever the winch is under load.
What’s included
The PAK includes heavy-duty gloves, a recovery chain, tow straps, a D-ring and a snatch block. The winch plate fits the 2007 to 2011 Jeep Wrangler JK.









