Mountain Off Road Enterprises has 82 parts in the Slickrock 4X4 catalog, most of them in Leaf Spring Shackle Kit (8), Motor Mount (6), Skid Plates (4) and Heim Joints (4). The vehicles Mountain Off Road Enterprises parts here fit most often are the Jeep Wrangler (YJ), Jeep CJ7 and Jeep CJ5. Mountain Off Road Enterprises part numbers look like "JKOPSP" and "WTB100"; each product title ends with its part number, and searching for one opens the product. Pick your vehicle at the top of the page to narrow the list to what fits.
Mountain Off Road Enterprises
Showing 1–48 of 82 resultsSorted by popularity
-
-
-
Engine Mount Bracket
Mountain Off Road Enterprises Torsion Rubber Bomb Proof Motor Mount – JM400
- Mountain Off Road Enterprises BombProof motor mount, part number MREJM400
- Polyurethane bushings in black
- Fits 1987–1995 Jeep Wrangler (YJ) models
- Built for deep gearing, big tires and high torque
SKU: MREJM400 -
-
-
Frame Stiffener
Mountain Off Road Enterprises Rear Frame Reinforcing Plates – FP200
- Four-piece rear frame reinforcing plate set for Jeep Cherokee XJ
- Fits 1984-2001 Cherokee XJ
- Plates run 3-1/2 feet long over the rear axle
- Two lower plates reinforce the shackle hanger area
- Part number FP200 from Mountain Off Road Enterprises
SKU: MREFP200 -
Frame Stiffener
Mountain Off Road Enterprises Rear Cross member Reinforcing Plate – RFP7686
- 3/16 inch laser cut rear crossmember reinforcing plate
- Fits 1976-1986 Jeep CJ5 and CJ7 and 1981-1985 Scrambler
- Bare steel, welding required
- Repairs or reinforces the rear frame
- Part number RFP7686 from Mountain Off Road Enterprises
SKU: MRERFP7686 -
Steering Gear Box & Components
Mountain Off Road Enterprises Heavy-Duty Drag Link – 9927
- Heavy-duty drag link for 1982-1986 Jeep CJ5, CJ7 and Scrambler
- 1-inch D.O.M. steel tube, .219 wall, with 5/8 threaded ends
- Teflon / Kevlar lined, self lubricating rod ends
- Jam nuts and grade 8 hardware included; stock hole must be drilled to 5/8 inch
SKU: MRE9927 -
Heim Joints
Mountain Off Road Enterprises Rod End – XMR12
- Universal fit rod end with a 3/4-16 right hand thread and 3/4 inch bore
- 52100 bearing steel ball with a Teflon/Kevlar self-lubricating race
- Ball hole diameter matches the threaded shank
- Alloy steel heat-treated body with a jam nut included
SKU: MREXMR12 -
Tube Adapters
Mountain Off Road Enterprises Tube End Inserts – TE12R
- Mountain Off Road Enterprises TE12R tube end insert for custom tie rods, track bars, radius arms and link bars
- 3/4 Inches – 16 right hand thread
- Welds to steel tubing with a minimum tube ID of 7/8 Inches
- Jam nut not included
- Universal fit, with no vehicle named.
SKU: MRETE12R -
-
-
-
Leaf Spring Hanger
Mountain Off Road Enterprises Spring Shackles Hangers – SR104
- Mountain Off Road Enterprises SR104 front spring shackle hangers, a pair
- Bare steel construction, not the chrome-moly used on most of the line
- Made for use with a shackle reversal system
- Fits 1987-1995 Jeep Wrangler (YJ) models
SKU: MRESR104 -
-
Spring Over Conversion Kit
Mountain Off Road Enterprises Spring Over Kit for Dana 60 Axle – SOK60
- Mountain Off Road Enterprises SOK60 spring over conversion kit, named for the Dana 60 axle
- 1/4 inch spring perches and U-bolt plates, 3/16 inch shock mounts
- Stated lift of 4-3/16 inch plus spring pack thickness
- U-bolts are not included
SKU: MRESOK60 -
Spring Over Conversion Kit
Mountain Off Road Enterprises Spring Over Kit for Dana 35 Axle – SOK35
- Spring over kit for the Dana 35 axle, part number SOK35
- Lifts the Jeep 3-7/16″ plus your spring pack thickness
- Spring perches and U-bolt plates of 1/4″ plate, shock mounts of 3/16″ plate
- U-bolts not included; the 5/8″ holes take 9/16″ U-bolts
SKU: MRESOK35 -
-
Motor Mount
Mountain Off Road Enterprises Torsion Rubber Bomb Proof Motor Mount – JM700
- Mountain Off Road Enterprises JM700 torsion rubber BombProof conversion mount
- Built for Gen III Chevy small block engine conversions
- Bare steel construction with black polyurethane bushings
- Fits 2004–2006 Wrangler LJ and 1997–2006 Wrangler TJ models
SKU: MREJM700 -
-
Motor Mount
Mountain Off Road Enterprises Bomb Proof Conversion Motor Mount – JM200
- Mountain Off Road Enterprises JM200 BombProof conversion motor mount
- Built for Chevy small and big block engine conversions in Jeeps
- Bare steel mount with black polyurethane bushings
- Fits 1972–1983 CJ5, 1976–1986 CJ7 and 1981–1985 Scrambler models
SKU: MREJM200 -
Skid Plates
Mountain Off Road Enterprises Front Skid Plate (Black) – JKFSP07
- Front skid plate for 2007-2012 Jeep Wrangler JK, 2 and 4-door models
- Protects the electronic sway bar disconnect and steering components
- 3/16-inch plate steel, black powder coat
- Bolt-on, no cutting or drilling required
SKU: MREJKFSP07 -
Battery & Battery Accessories
Mountain Off Road Enterprises Dual Battery Tray – JKDBT12
- Fits 2012–2016 Jeep Wrangler (JK) in 2-door and Unlimited trims
- Dual battery tray holds two Optima series 34 or 34/78 batteries side by side
- Bolt-in mounting uses existing holes, no drilling
- Includes straps with metal buckles and nut protector caps; wiring not included
SKU: MREJKDBT12 -
Battery & Battery Accessories
Mountain Off Road Enterprises Dual Battery Tray (Black) – JKDBT0709
- Mountain Off Road Enterprises black dual battery tray, part JKDBT0709
- Bolt-in with existing holes, no drilling required
- Holds two Optima series 34 or 34/78 or OEM batteries
- Fits 2007–2011 Jeep Wrangler (JK)
SKU: MREJKDBT0709 -
Misalignment Spacers & Washers
Mountain Off Road Enterprises 3/4 Inch High Misalignment Washer – HDW34
Misalignment Spacers & WashersMountain Off Road Enterprises 3/4 Inch High Misalignment Washer – HDW34
- Mountain Off Road Enterprises HDW34 3/4 inch high misalignment washer
- Gives a heim joint room to move through its full travel
- Can also set clearance between a link and nearby surfaces
- Marked universal fit
SKU: MREHDW34 -
Frame Stiffener
Mountain Off Road Enterprises Front Frame Reinforcing Plates – FP300
- Front frame reinforcing plates, two piece set, part number FP300
- Listed fitment: 1976–1983 Jeep CJ5, 1976–1986 CJ7, 1981–1985 Scrambler
- 5 feet long, bare steel
- Brand: Mountain Off Road Enterprises; UPC 70000503419
SKU: MREFP300 -
-
Foot Rest/Pad
Mountain Off Road Enterprises Dead Pedal – DP9706PS
- Passenger-side dead pedal for 1997-2006 Jeep Wrangler TJ and 2004-2006 Wrangler LJ Unlimited
- Works with automatic or manual transmissions
- Bolt-in design requires minor drilling
- Powder coated black finish
- Part number DP9706PS, UPC 815572020567
SKU: MREDP9706PS -
-
-
Body Lift Kits
Mountain Off Road Enterprises 1 Inch Body Lift – BLTJ97
- Mountain Off Road Enterprises 1 inch body lift, part number BLTJ97
- Solid 6061 T-6 aluminum body pucks, natural finish
- Includes hardware, fits all transmissions
- Fits 1997 to 2006 Wrangler TJ and 2004 to 2006 Wrangler LJ
SKU: MREBLTJ97 -
Universal Bushing
Mountain Off Road Enterprises Universal Bushing Assemblies – BA200
- Mountain Off Road Enterprises universal bushing assembly, part number BA200
- Two black polyurethane halves with outer steel tubing and inner steel sleeve
- Includes mounting bolt and locking nut
- Universal fit, for custom motor mounts and link bars
SKU: MREBA200 -
Universal Bushing
Mountain Off Road Enterprises Universal Bushing Assemblies – BA175
- Mountain Off Road Enterprises universal bushing assembly, part number BA175
- Polyurethane bushing halves with steel tubing and steel inner sleeve
- Includes mounting bolt and locking nut
- Universal fit, for fabricated mounts and brackets
SKU: MREBA175 -
Universal Bushing
Mountain Off Road Enterprises Universal Bushing Assemblies – BA125
- Mountain Off Road Enterprises universal bushing assembly, part number BA125
- Two polyurethane bushing halves with steel outer tubing and inner sleeve
- Includes mounting bolt and locking nut
- Universal fit, for builders making their own mounts and brackets
SKU: MREBA125 -
Steering Kit
Mountain Off Road Enterprises Steering Correction Kit Stage One – 9930Z
- Fits 1987-1995 Jeep Wrangler YJ with spring over axle suspensions
- Intended for 3 to 7 inches of lift only; works with stock leaf springs or lift springs up to 2.5 inches over the axle
- Includes knuckle bracket, tie rod and drag link assembly, and hardware kit
- Zinc plated; part number 9930Z, UPC 815572020420
SKU: MRE9930Z -
Steering Kit
Mountain Off Road Enterprises Steering Correction Kit Stage One – 9930
- Steering correction kit for 1987–1995 Jeep Wrangler YJ with spring over axle suspension
- Includes knuckle bracket, tie rod and drag link assembly, and hardware kit
- For stock leaf springs over the axle or lift springs up to 2.5″ over the axle
- Bare steel finish
- Part number 9930; UPC 815572020161
SKU: MRE9930 -














































