Overview
The Mountain Off Road Enterprises T-103 is a universal mounting tab, made of 3/16″ bare steel with a 9/16″ bolt size and prepunched holes. It is ready to weld on, so it can be attached to a frame, bracket or custom build. Tabs of this type are used to mount accessories such as shocks, lights, link bars and exhaust systems.
The tab is plain steel rather than a finished bracket, so it needs fabrication before it goes into service. It is a universal part with no make, model or year fit, so the mounting point and accessory decide whether it suits your build. Measure your accessory and mounting point before you weld.
Key features
- 3/16″ steel construction
- Bare steel finish, ready to weld on
- Length of 2-5/8 inch
- 9/16″ bolt size with prepunched holes
- Universal application for accessories such as shocks, lights, link bars and exhaust systems
Choosing a mounting tab
Mounting tabs carry the load of whatever they hold, so the weld and the base metal matter as much as the tab itself. A thicker steel tab resists bending, while the hole pattern and offset decide how the accessory lines up with the link or frame. Plan the tab position before cutting, because a tab that sits a little off can change the geometry of a shock or link.
Welding bare steel leaves the base metal exposed. After welding, clean the weld area and apply a coating such as paint or a rust-resistant primer, especially if the tab will see mud, water or road salt. Check the welds and the tab after the first few trips, looking for cracks near the weld toes or any change in alignment.
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | T-103 |
| UPC | 70000503457 |
| Type | Universal mounting tab |
| Material | Steel, 3/16″ thick |
| Finish | Bare steel |
| Length | 2-5/8 inch |
| Bolt size | 9/16″ |
| Holes | Prepunched |
| Tube diameter | Any |
| Sold as | Single |
Vehicle fitment
It is a universal part with no specific vehicle named. Confirm the mounting location and clearance for your accessory and your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The tab is ready to weld on, so welding is the usual way to attach it. Confirm the placement and clearance for your accessory before welding, and plan around the prepunched holes. Because the steel is bare, coat the tab after welding if it will see wet or muddy conditions.
What’s included
One universal mounting tab, sold as a single piece.
Not included: the accessory being mounted, the bolts and fasteners, and welding equipment.









