Overview
The Mountain Off Road Enterprises TE12R is a tube end insert, a threaded fitting that welds to steel tubing so you can build custom tie rods, track bars, radius arms or link bars without a lathe. It has 3/4 Inches – 16 right hand threads and needs steel tubing with a minimum tube ID of 7/8 Inches.
Mountain Off Road Enterprises says its tube ends cover the most popular sizes for builders making their own suspension links. The TE12R is not vehicle-specific; the manufacturer labels it Universal Fit, so match the thread and tube size to your project.
Key features
- Threaded end for custom tie rod, track bar and link projects
- Welds to steel tubing with a minimum tube ID of 7/8 Inches
- Right hand thread, 3/4 Inches – 16
- Made for fabricators who want threaded ends without a lathe
- No jam nut included
Building the link safely
Tube end inserts turn a straight length of steel tubing into a link with a threaded end. Before cutting tubing, decide the finished length, the joint type and the jam nut position, because the threaded end needs to sit square in the tube. Clamp the insert in a jig so the thread axis lines up with the tube, and tack it in several places before running a full bead.
After welding, let the joint cool and check that the threads run clean with a mating jam nut or gauge. Weld distortion can close the threads slightly, so chase them with a tap if needed. Inspect the weld for cracks and undercut each time you service the link, since a cracked insert can let a rod end pull free under load. Store spare inserts in a dry place so the threads do not rust before use.
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | TE12R |
| UPC | 70000503388 |
| Thread size | 3/4 Inches – 16 |
| Thread direction | Right hand |
| Minimum tube ID | 7/8 Inches |
| Jam nut included | No |
| Fitment | Universal Fit |
Vehicle fitment
No vehicle fitment applies to this insert because it is a fabrication part for custom builds. Fit depends on the thread size and tubing ID, not on make, model or year.
Check that your tubing has at least a 7/8 Inches inside diameter and that the 3/4 Inches – 16 right hand thread suits your rod end before welding. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The TE12R is welded in, not bolted on. Weld it to steel tubing whose inside diameter is at least 7/8 Inches, and weld in a space with proper eye and fire protection.
What’s included
The tube end insert, part number TE12R.
Not included: Jam nut.









