Overview
The Mountain Off Road Enterprises zerk bolts, part number S10199, are a do-it-yourself project part with a universal fit marking. A zerk is a grease fitting.
Before you buy
A zerk bolt takes a grease fitting in place of a plain bolt head, so the joint it sits in can be lubricated without disassembly. Grease helps reduce wear and corrosion at pivots and pins, and it gives the moving parts a path for fresh lubricant to push out contaminants. Choosing one starts with the joint itself: check the bolt’s diameter, thread pitch, length and head style against the original, because a grease fitting that does not thread in cleanly will leak or strip.
Before buying, look at what the joint carries. A bolt in a high-load pivot needs the same strength grade as the one it replaces, and a zerk head should seat flat enough to clear nearby brackets and clamps. Replace worn bushings or pins at the same time if play is already present, since a new fitting cannot correct a worn bore. After installation, grease the joint until a little fresh lubricant appears, wipe the fitting and check it occasionally for damage from rocks or brush.
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | S10199 |
| UPC | 815572020895 |
Vehicle fitment
Universal fit is the only fitment noted, so no particular vehicle can be confirmed. Measure the bolt you are replacing and compare the size before choosing this one.
Confirm your vehicle’s year, model and trim before ordering.









