Overview
The Mountain Off Road Enterprises 9929 is a bare steel drag link for the Jeep CJ5 and CJ7 from 1972 to 1981 and the 1981 Jeep Scrambler. It is built from 1 inch O.D. by .219 wall D.O.M steel tubing with threaded 5/8 rod ends.
The rod ends are Teflon and Kevlar lined and self lubricating, with alloy steel bodies that are heat treated and plated. The drag link has a bare steel finish and is made for Dana 30 narrow track axles.
Key features
- 1 inch O.D. by .219 wall D.O.M steel tubing
- Threaded 5/8 left and right rod ends with wrench flats
- Teflon and Kevlar lined, self lubricating rod ends
- Mounts under or over the knuckles
Bare steel links and corrosion
A bare steel drag link has no paint or coating from the factory, so it can start to rust in damp climates, under road salt or after mud exposure. Surface rust on a tube is usually harmless at first, but deep pitting near the rod ends can weaken the link over time. Inspect the tube and threaded sections whenever the front end is serviced.
Protecting the link with a primer and paint after installation extends its life, provided the rod ends are kept clear of coating so they can still turn freely. Grease the ends at the fittings, and keep the threads free of dirt before tightening. Bare steel parts also benefit from a periodic wipe down after wet trail runs.
- Look for pitting near rod ends
- Paint the tube after fitting
- Keep rod end threads clean
- Grease ends after wet runs
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | 9929 |
| UPC | 70000503487 |
| Tubing | 1 inch O.D. x .219 wall D.O.M steel |
| Rod end thread | 5/8 left and right |
| Rod end body | Alloy steel, heat treated and plated |
| Finish | Bare steel |
| Axle compatibility | Dana 30 narrow track |
Vehicle fitment
It fits the 1972–1981 Jeep CJ5 (Base, Golden Eagle, Laredo, Renegade), the 1976–1981 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Renegade) and the 1981 Jeep Scrambler (Base).
Model years from 1982 onward are not on this list, and Jeep Wrangler models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rod ends mount under or over the knuckles, and the stock tapered hole must be drilled to a straight 5/8 inch hole. Wear eye protection when drilling.
What’s included
Jam nuts and grade 8 hardware are provided with the drag link.








