Overview
The Mountain Off Road Enterprises FP300 is a two piece set of front frame reinforcing plates for listed Jeep CJ5 and CJ7 models from 1976 to 1986 and the 1981 to 1985 Jeep Scrambler.
Each plate is 5 feet long and flat, starting at the front bumper and running back past the first body mount outrigger. Frame reinforcing plates like these add stiffness to the front section of the frame, and this set is made from bare steel.
Key features
- Two piece set of front frame reinforcing plates
- Plates are 5 feet long and flat
- Runs from the front bumper back past the first body mount outrigger
- Bare steel finish.
- Fitting requires removing and reinstalling the body mount outrigger
Front frame stiffness and rust
Front frame sections take a lot of stress from off-road bumps, winch pulls and bumper loads. When the frame flexes at the front, the body mounts and the steering geometry can be affected, which is why reinforcing plates are a common upgrade for older Jeeps. Stiffer metal in that area helps the frame hold its shape, but it does not replace repairs to frame sections that are already cracked.
Bare steel rusts quickly once the mill finish is gone, so clean the mating surfaces back to metal and coat them before the plates go on. Inspect the frame under the plates after the first season of use, and watch for bubbling paint near welds or bolt holes. Keep the body mount hardware torqued to specification during the install, and recheck it after the first few drives.
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | FP300 |
| UPC | 70000503419 |
| Part type | Front frame reinforcing plates |
| Pieces | Two piece set |
| Length | 5 feet |
| Material and finish | Bare steel |
| Position | Front |
| Fit type | Direct fit, per manufacturer listing |
Vehicle fitment
It fits 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade) and 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR).
The list does not include Jeep CJ models before 1976, Jeep Wrangler models or other vehicles outside the three entries above. Check that your year, model and trim appear in the list above before choosing this plate set.
Installation notes
Fitting involves removing the body mount outrigger, installing the frame plate and reinstalling the outrigger. A shorter option is to cut the plate off at the first outrigger and weld it on. Welding and cutting steel calls for proper eye protection and fire precautions.
What’s included
The set contains two plates, sold as a two piece set.
Not included: welding equipment, which the cut-and-weld option requires.









