Overview
The Mountain Off Road Enterprises SOK60 is a spring over conversion kit for a Dana 60 axle. It mounts the springs on top of the axle for added lift, with 1/4 inch spring perches and U-bolt plates and 3/16 inch shock mounts. The lift is 4-3/16 inch plus the thickness of your spring pack. U-bolts are not included.
Key features
- Spring perches and U-bolt plates of 1/4 inch plate
- Shock mounts of 3/16 inch plate
- 5/8 inch holes in the U-bolt plates for 9/16 inch U-bolts
- Stated lift of 4-3/16 inch plus spring pack thickness
- Described by the manufacturer as built heavy duty
Lift and driveline checks
A spring over changes where the axle sits relative to the frame, so the driveline angles and pinion position should be checked after the new height is set. A higher pinion angle can cause vibration, while a lower one can wear the U-joints faster. Measure the angles with the truck at its normal ride height and correct them before highway use.
Because the spring pack affects the total lift, the final height is best judged with the truck fully loaded for regular use. Check the brake lines, steering linkage and shock travel at the new height. Re-tighten the U-bolts after the first drives since new plates can settle.
- Measure driveline angles at ride height
- Check brake lines for stretch at full travel
- Inspect shock travel after the lift
- Re-tighten U-bolts after initial drives
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | SOK60 |
| UPC | 700007050101 |
| Axle | Dana 60 (per title) |
| Spring perch and U-bolt plate thickness | 1/4 inch |
| Shock mount thickness | 3/16 inch |
| U-bolt plate holes | 5/8 inch |
| U-bolt size | 9/16 inch (U-bolts not included) |
| Stated lift | 4-3/16 inch plus spring pack thickness |
Vehicle fitment
The kit is for a Dana 60 axle, so confirm your axle before ordering. Axle names alone do not identify a vehicle, so match your truck to the kit before buying, since the Universal Fit label does not replace an axle match.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing the spring mounting position alters the axle’s location, so verify driveline angles and alignment once the new height is set. Keep U-bolts sized to 9/16 inch ready, as they are not supplied.
What’s included
Not included: U-bolts.









