Overview
The Mountain Off Road Enterprises T-300 is a radius tab with a 4 in. stand off, a 1/4 in. thickness and a 9/16 in. hole, sized for a 3 in. tube. It is bare steel and ready to weld on, and it is universal application, so no vehicle is named.
Tabs in this family are used to mount accessories such as shocks, lights, link bars and exhaust systems, and the T-300 is built for the radius tab role. Check the 4 in. stand off against your layout before welding, since the stand off determines where the mounting point sits from the tube. Radius arm builds depend on the mounting point being in the right place.
Check that the 3 in. tube matches the arm you are building before you cut or weld anything, and confirm the 1/4 in. thickness suits the load your build will see.
Key features
- 9/16 in. hole size
- 4 in. stand off
- 1/4 in. thick bare steel
- Built for a 3 in. tube diameter
- Ready to weld on
- Universal application, sold individually
Radius tab geometry
A radius arm controls the fore and aft location of the axle while the suspension travels, so the radius tab is where that load enters the frame or axle. The tab’s position sets the arm’s effective length and its angle, which changes how the axle moves through its range. Small changes in the mounting point can noticeably alter the feel and the wear pattern of the joint.
Before welding, mark the tab position with the axle at ride height and again at full droop, then check that the arm clears the tire, the frame and any brake lines. Tube wall thickness and weld quality both matter here, since radius arms see constant load. Inspect the welds and the tab after rough trail use, looking for cracking, bent steel or loose bushings.
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | T-300 |
| UPC | 70000503373 |
| Type | Radius tab |
| Hole size | 9/16 in. |
| Stand off | 4 in. |
| Thickness | 1/4 in. |
| Tube diameter | 3 in. |
| Finish | Bare steel |
| Application | Universal |
| Sold as | Single |
Vehicle fitment
No specific vehicle is named. It is a universal application radius tab, and the 3 in. tube diameter is the main sizing point. Measure your radius arm before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The tab is ready to weld on. Set it at the position your build needs, confirm that the 4 in. stand off clears your mounts, and then weld it in place. Make sure the 3 in. tube is the right size for the tab before you start.
What’s included
One radius tab, sold individually.
Not included: the radius arm, the 3 in. tube and welding equipment.









