Overview
The Mountain Off Road Enterprises (M.O.R.E.) JLECS18 is a black powder coated 11 gauge steel evap canister shield for the 2018–2019 Jeep Wrangler (JL).
M.O.R.E. says Jeep did a good job on the JL by downsizing the evap canister and mounting it up high, but the canister is still vulnerable to sticks and brush. The shield is a simple solution that covers the canister, and it is made in the U.S.A.
The evap canister on the JL is part of the fuel vapor system, and a stick or rock can break it. The canister is smaller and mounted higher than before, yet it remains exposed. This shield is an 11 gauge steel plate with a black powder coat that bolts to holes already in the vehicle, so no drilling is needed. It is made in the U.S.A. It fits the 2018–2019 Wrangler JL in two-door and four-door trims.
Key features
- Covers the evap canister to protect it from sticks and brush
- 11 gauge steel
- Powder coated black
- Mounts to factory holes
- No drilling required
- Made in the U.S.A.
Protecting the vapor system
The evaporative emissions system holds fuel vapor until the engine can burn it, and the canister that stores it is one of the more exposed components under the front of many Jeeps. When a canister is torn or cracked, the vehicle can set codes and lose its ability to manage vapor, so physical protection is a sensible step for anyone who drives on trails with brush, sticks and rocks.
A shield works best when it is inspected along with the lines and clamps that run to the canister. After rough driving, look for scuffs, loose fasteners and any hose that has rubbed through. Keep the area clear of mud and debris so the shield can drain and the coating stays intact. Any aftermarket underbody parts added near the canister should be checked for clearance before a shield is installed.
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | JLECS18 |
| Product type | Evap canister shield (evap canister skid) |
| Material | 11 gauge steel |
| Finish | Black powder coat |
| Mounting | Factory holes, no drilling required |
| Origin | Made in the U.S.A. |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018–2019 Jeep Wrangler (JL).
Because the shield uses holes already in the JL, a Jeep modified near the canister, such as one fitted with a different skid plate, should be checked before installation. The 2018–2019 JL fits Rubicon, Sport and Sport S two-door models and four-door Unlimited Rubicon, Sahara, Sport and Sport S models. Later JL model years and the Gladiator fall outside this fitment, so confirm fit for your vehicle’s year, model and trim before ordering.
The list covers the 2018–2019 Wrangler (JL). Later JL model years, the Gladiator and earlier Wranglers are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
M.O.R.E. says the shield installs using factory holes and requires no drilling.










