Overview
The Mountain Off Road Enterprises TB500 is a black rear traction bar for Jeep CJ and YJ vehicles with rear leaf springs mounted over the axle. The manufacturer fitment list covers 1976–1986 Jeep CJ7 and 1987–1995 Jeep Wrangler (YJ) models.
The heavy duty bar is meant to stop spring wrap without limiting suspension travel. A Johnny Joint mounted shackle attaches to the transfer case cross member and converts the twisting forces of the axle into up and down motion at the front of the bar. The shackle at the front lets the axle and bar move fore and aft, but not up and down, which is the motion that causes wrap.
Key features
- Heavy duty bar designed to prevent spring wrap
- Johnny Joint mounted shackle at the transfer case cross member
- Front shackle allows fore and aft movement of the axle
- Designed not to limit travel or flexibility
- Hardware included with the axle mounting brackets
Why leaf springs wrap
Leaf springs mounted over the axle are prone to wrap, because the axle rotates under torque and twists the springs. A traction bar counters that twist by controlling the axle’s rotation while keeping its fore and aft movement. Bar geometry matters, since it determines how much up and down motion is turned into resistance at the front of the bar.
Older Jeep axles and mounts can carry rust or fatigue, so inspect the axle housing, bracket locations and existing spring hangers before welding. Keep the welded area clean and check the Johnny Joint for play after trail use. Bar bushings and joints wear with time and should be replaced when they loosen.
- Inspect the axle housing for rust before welding
- Check spring hangers and shackles
- Look for looseness at the Johnny Joint
- Confirm clearance from exhaust and fuel lines
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | TB500 |
| UPC | 815572021069 |
| Position | Rear |
| Color | Black |
| Material | Bare steel |
| Mounting | Weld-on |
| Included hardware | Hardware and axle mounting brackets |
Vehicle fitment
The manufacturer fitment list covers 1976–1986 Jeep CJ7 models in the Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, and 1987–1995 Jeep Wrangler (YJ) models in several trims.
CJ5 and TJ models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This bar is weld-on, not bolt-on. The axle mounting brackets must be welded to the axle housing, so have a welder experienced with axle housings do the work, since the bar carries axle torque.
What’s included
The traction bar with hardware and axle mounting brackets.









