Select your vehicle

Mountain Off Road Enterprises Tube End Inserts – TE10R

Mountain Off Road Enterprises

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Mountain Off Road Enterprises TE10R, 5/8 inch -18 right hand tube end insert
  • Minimum tube inside diameter 3/4 inch
  • Universal fit; jam nut not included

Description

Overview

The Mountain Off Road Enterprises TE10R is a 5/8 inch -18 right hand tube end insert. It welds to steel tubing to give you a threaded end, so you can build your own tie rods, track bars, radius arms or link bars without a lathe.

It covers the most common sizes for these builds. It needs tubing with a minimum inside diameter of 3/4 inch. A jam nut is not included, so you need to supply one. Because it is a custom build component, no vehicle applies.

Key features

  • 5/8 inch -18 right hand thread
  • Weld-in tube end for steel tubing
  • Minimum tube inside diameter 3/4 inch
  • Jam nut not included
  • Suits custom tie rods, track bars, radius arms and link bars

Choosing jam nuts and rod ends

The insert is a weld-in part, so the rod end and the jam nut are chosen to suit the thread and the tube. Match the rod end to the 5/8 inch -18 right hand thread, and confirm the jam nut is the same thread size. A jam nut locks the rod end so it does not turn under load and loosen during use.

Steel tubing should be cleaned and checked before welding. Remove mill scale, paint and rust from the weld area, and confirm the tube inside diameter fits the insert’s minimum. Inspect the threads after welding and after early trail use, since heat and vibration can affect how the rod end seats.

  • Match jam nut thread to the insert
  • Clean steel before welding
  • Recheck lock nut after early use

Specifications

Brand Mountain Off Road Enterprises
Part number TE10R
UPC 70000503384
Thread size 5/8 inch -18
Thread direction Right hand
Minimum tube ID 3/4 inch
Jam nut Not included
Attachment Weld to steel tubing
Fitment Universal fit

Vehicle fitment

It is universal fit and not built for a particular vehicle. Fit depends on the tubing you weld it into and the rod end you thread onto it.

Installation notes

Weld the insert to steel tubing whose inside diameter is at least 3/4 inch. Get a jam nut separately, since none comes with the insert.

What’s included

One tube end insert, 5/8 inch -18 right hand thread.

Not included: the jam nut, the steel tubing and the rod end.

SKU: MRETE10R Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 5.00 × 5.00 × 5.00 in
brands

Questions & Answers

What thread does the TE10R have?

It has a 5/8 inch -18 right hand thread. It is a weld-in tube end insert from Mountain Off Road Enterprises, designed for custom steel tubing builds.

Is a jam nut included with the TE10R?

No. The product states jam nut not included, so a jam nut needs to be supplied separately to lock the rod end in place.

What tube size does it need?

The minimum tube inside diameter is 3/4 inch. Confirm your steel tubing meets that size before welding the insert in place.

What should I check on a tie rod built with this insert?

Check that the rod end turns freely on the thread, that the jam nut is tight against the rod end, and that the weld is sound along the full joint. Replace any rod end with a damaged or stripped thread before the link goes back into service.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon