Overview
The Mountain Off Road Enterprises Universal Bushing Assembly, part number BA125, is built for fabricators who make their own parts and mounts. It holds a component tight and rattle free while absorbing vibration, yet it can still be removed.
Fabricators use this bushing style for motor mounts, cage to frame mounting points, spare tire carriers, cargo racks, link bars, track bars and radius arms. The same bushing style is used in BombProof mounts.
Key features
- Two black polyurethane bushing halves
- Outer steel tubing and inner steel sleeve
- Holds a component tight, rattle free and absorbs vibration
- Removable design
- Mounting bolt and locking nut included
Designing a fabricated mount
Fabricated mounts put the bushing under load in a way a factory bracket does not, so plan the geometry first. Decide the load direction, the bushing orientation, and the clearance around moving parts before cutting metal. A mount that binds will wear the bushing faster than a correctly aligned one.
Polyurethane halves are firmer than rubber and can transmit more vibration to the mount. Consider a bracket gusset or a wider base where loads are high. Inspect the bushing and locking nut after rough use, and retighten the bolt if the assembly shows movement. Test the mount under the expected load before relying on it.
- Dry-fit the bushing before welding
- Check clearance through full travel
- Use gussets where loads concentrate
- Inspect the locking nut periodically
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | BA125 |
| UPC | 815572021328 |
| Product type | Universal bushing assembly |
| Bushing halves | Polyurethane, black, two halves |
| Tubing and sleeve | Outer steel tubing, inner steel sleeve |
| Hardware | Mounting bolt and locking nut |
| Fitment | Universal fit |
Vehicle fitment
This assembly is universal fit and is not built for a particular vehicle, so no make, model or year applies. Whether it suits your application depends on the mounting points you build.
Check the mounting points and clearance for your application before fitting.
Installation notes
Because the bushing is meant for fabricated mounts, plan the housing and mounting bolt location before you cut or weld, and dry-fit the assembly first.
What’s included
Two polyurethane bushing halves, outer steel tubing, an inner steel sleeve, a mounting bolt and a locking nut.








