Overview
The Mountain Off Road Enterprises TE12L is a 3/4 inch -16 left hand tube end insert for steel tubing. Welded in, it gives a threaded end for custom work such as radius arms, link bars, tie rods or track bars. A left hand thread runs the opposite direction to a right hand thread, so check each end of a link before welding.
The brand describes its range as covering the most popular sizes. The minimum tube inside diameter is 7/8 inch, and no jam nut comes with it, so you will need one separately. Because the insert is a custom build part, no vehicle is named.
Key features
- 3/4 inch -16 left hand thread
- Weld-in tube end for steel tubing
- Minimum tube inside diameter 7/8 inch
- Jam nut not included
- Designed for the most common tube end sizes
Left hand threads in custom links
Left hand threads are used where a link needs to adjust in the opposite direction from a right hand end. Pairing a left hand insert with a right hand part gives a link that can be shortened or lengthened by turning the bar. Label the ends during fabrication so the two sides are not mixed up.
The minimum tube inside diameter sets the smallest tubing that can take the insert. Choose tubing that is clean, round and free of dents at the weld point. Inspect the threads and the weld after the first trail runs, and check that the jam nut stays tight once the link is in service.
- Label left and right ends during build
- Use round, undamaged tubing
- Inspect welds after early use
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | TE12L |
| UPC | 70000503389 |
| Thread size | 3/4 inch -16 |
| Thread direction | Left hand |
| Minimum tube ID | 7/8 inch |
| Jam nut | Not included |
| Attachment | Weld to steel tubing |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit and not vehicle-specific. Fit depends on the steel tubing and the left hand rod end used in your build.
Installation notes
Confirm the left hand thread matches the rod end, since a right hand end will not thread onto it. Weld only to tubing with an inside diameter of at least 7/8 inch.
What’s included
One left hand tube end insert, 3/4 inch -16 thread.
Not included: the jam nut, tubing and rod end.







