Towing
Showing 73–84 of 1114 resultsSorted by popularity
-
Brake Controller Mounting Brackets
Redarc Tow-Pro Elite Mounting Kit – EBMK-001
- Redarc Tow-Pro Elite mounting kit, part number RAEEBMK-001
- Mounts the Tow-Pro Elite electric trailer brake controller main unit under a dash
- Fastens with 2 x M4 bolts and an M6 slot for vehicle connection
- Universal fit, not vehicle-specific
SKU: RAEEBMK-001 -
Trailer Brake Control Wire Harness
Redarc Tow-Pro Brake Controller Harness – TPH-020
- Lets a Tow-Pro Elite or Tow-Pro Classic controller plug into Ram factory towing connectors
- Fits 2015–2017 Ram 1500, Ram 2500 and Ram 3500 trucks in the listed trims
- Plugs in behind the dash; part number RAETPH-020
- CARB EO Number A-2020-114
SKU: RAETPH-020 -
Trailer Brake Control Wire Harness
Redarc Tow-Pro Brake Controller Harness – TPH-019
- REDARC TPH-019 Tow-Pro harness linking a Tow-Pro Elite or Classic into an existing Curt harness
- Loom with compatible connector and fitting instructions included
- Plug-and-play connection for the Tow-Pro Elite
- No vehicles listed; marked universal fit
SKU: RAETPH-019 -
Trailer Brake Control Wire Harness
Redarc Tow-Pro Brake Controller Harness – TPH-018
- Wiring harness for the Redarc Tow-Pro Elite or Classic brake controller
- Connects to an existing Hopkins brake controller harness
- Plug-and-play with the Tow-Pro Elite
- Includes fitting instructions and loom
SKU: RAETPH-018 -
Trailer Brake Control Wire Harness
Redarc Tow-Pro Brake Controller Harness – TPH-017
- REDARC TPH-017 Tow-Pro harness for connecting a Tow-Pro Elite or Classic into an existing Tekonsha harness
- Loom with compatible connector and fitting instructions included
- Tech Tip covers installs using Tekonsha, Curt or Hopkins harnesses
- No vehicles listed; marked universal fit
SKU: RAETPH-017 -
Trailer Brake Control Wire Harness
Redarc Tow-Pro Brake Controller Harness – TPH-014
- Redarc Tow-Pro brake controller harness, part number TPH-014
- Plug-and-play connection to the factory-fitted connector on listed Infiniti and Nissan models
- Works with Tow-Pro Elite or Tow-Pro Classic brake controllers
- Harness length 32″ (2.67 feet / 812.8mm)
SKU: RAETPH-014 -
Trailer Brake Control Wire Harness
Redarc Tow-Pro Brake Controller Harness – TPH-013
- Fits 2007–2012 Acura MDX, 2006–2019 Honda Pilot and Honda Ridgeline (2006–2014, 2017–2019)
- Plug and play harness for Tow-Pro Elite or Tow-Pro Classic brake controllers
- For models with a factory tow package
- Includes harness, fitting instructions and loom with connector
SKU: RAETPH-013 -
Trailer Brake Control Wire Harness
Redarc Tow-Pro Brake Controller Harness – TPH-010
- REDARC TPH-010 Tow-Pro harness for Chevrolet and GMC factory towing package connectors
- Fits 2014–2018 Chevrolet Silverado and GMC Sierra 1500, plus 2015–2018 Suburban, Yukon and Yukon XL
- Connects Tow-Pro Elite or Tow-Pro Classic brake controllers
- CARB EO number A-2020-114
SKU: RAETPH-010 -
Trailer Brake Control Wire Harness
Redarc Tow-Pro Brake Controller Harness – TPH-007
- Plug-and-play brake controller harness for 2005-2018 Ford Expedition, F-150, F-250, F-350 and Flex
- Connects the Tow-Pro Elite or Tow-Pro Classic
- Installs to the factory towing package connector behind the dash
- CARB EO Number A-2020-114
SKU: RAETPH-007 -
Trailer Brake Control Wire Harness
Redarc Tow-Pro Brake Controller Harness – TPH-005
- Connects Tow-Pro Elite or Tow-Pro Classic brake controllers to Ford and Lincoln factory towing connectors
- Fits 2008–2013 Ford F-250 and F-350 Super Duty and 2013–2014 Lincoln Navigator and Navigator L
- Plugs in behind the dash; part number RAETPH-005
- CARB EO Number A-2020-114
SKU: RAETPH-005 -
-
Suspension Air Helper Spring Kit
ReadyLift ReadyAIR Load Leveling Helper Spring Kit – 88-32200
- ReadyLift ReadyAIR load leveling helper spring kit, part number RDY88-32200
- Fits 2020–2026 Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD in listed trims
- LOGIQ air spring technology, 100% factory assembled
- Not for use with factory overload springs or dual rear wheels
- Direct fit
SKU: RDY88-32200
What belongs in a towing setup
A complete tow setup has several links: a hitch mounted to the vehicle, a ball mount or head, a coupler-compatible ball, wiring, and, for heavier trailers, a brake controller and some form of suspension support. Weak or mismatched parts in any link limit the whole system, so it helps to think of the setup as a chain rather than a shopping list of separate items.
This category spans bolt-on receiver hitches, drop and adjustable ball mounts, gooseneck and fifth wheel mounting hardware, hitch pins and locks, trailer wiring connectors, mud flaps, and air or leaf-spring helpers that firm up the rear of a loaded truck.
Know your ratings first
Start with the numbers on your vehicle's door-jamb label and in the owner's manual: gross vehicle weight rating, gross combined weight rating, and the maximum tow rating. Every component, including the hitch class, ball mount, ball, pin, and trailer coupler, has its own rating, and your usable capacity is the lowest of them all.
Tongue weight matters as much as total weight. A trailer that is too light on the tongue can sway, while one that is too heavy overloads the rear axle and lifts weight off the front wheels. Many tow guides suggest roughly 10 to 15 percent of trailer weight on conventional trailers, but follow the manufacturer's numbers.
Matching hitch type to the job
- Receiver hitches come in classes, commonly I through V, with larger classes using 2-inch or 2.5-inch receiver openings and higher ratings.
- Gooseneck and fifth wheel hitches mount in the truck bed and suit heavy livestock, equipment, and RV trailers.
- Weight-distributing hitches and sway control spread tongue weight across the axles of the tow vehicle and trailer.
- Drop and rise ball mounts level the trailer so the coupler sits at the right height.
Measure from the ground to the top of the receiver and to the coupler of a level trailer before choosing a drop or rise.
Supporting the load and installing safely
Air springs, helper leaf springs, and similar load-leveling kits reduce rear sag when the truck is loaded. They do not raise the vehicle's rated capacity, so never treat them as a way to exceed the ratings on the label.
Many hitches bolt to existing frame holes, but some require drilling, trimming plastic, or removing exhaust parts. Use a torque wrench, follow the specified bolt torque, and recheck after the first few trips. Confirm fitment for your exact year, make, and model, and check the manufacturer's specifications before installing. Professional installation is sensible for gooseneck, fifth wheel, and brake controller wiring.
Common mistakes to avoid
Towing problems usually come from mismatched parts rather than a single bad component. Typical errors include using a ball that is rated below the trailer, ignoring tongue weight, skipping safety chains, and forgetting to confirm that the wiring connector matches the trailer plug.
Before every trip, walk around the rig: check the coupler latch and pin, chain crossing, light function, tire pressure on both vehicles, and brake controller gain. Lock the hitch pin when parked to deter theft.
Popular Towing brands
- Curt Manufacturing (269)
- AirLift (123)
- B&W Hitch (117)
- Firestone Ride-Rite (99)
- DrawTite (67)
- BOLT Lock (58)
- Weigh Safe Hitches (38)
- Smittybilt (37)
- Fastway Trailer Products (31)
- Supersprings (31)
- Husky Liners (26)
- Trimax Locks (22)
Shop Towing by type
- Suspension Load Leveling Kit (190)
- Hitches (200)
- Trailer Hitch Ball Mount (90)
- Brake Controllers & Electrical (118)
- Drop Hitches & Ball Mounts (86)
- Load Leveling Kits & Components (78)
- Trailer Hitch Pin Lock (47)
- Mud Flaps (43)
- Towing Accessories (49)
- Gooseneck Trailer Hitch (34)
- Leaf Spring Helper (26)
- Cargo Management (79)
- Gooseneck Trailer Hitch Mount Kit (16)
- Trailer Hitch Pin (14)
- Fifth Wheel Trailer Hitch Mount Kit (12)
- Truck Bed Cargo Organizer (9)
- Padlock (11)
- Trailer Wire Adapter (10)
- Trailer Hitch Covers (15)
- Fifth Wheel Trailer Hitch Bracket (7)
- Truck Tool Box Lock (8)
- Tow Bar Mounting Hardware (7)
- Fifth Wheel Trailer Hitch Slider (7)
- Trailer Wire Connector (5)
- Tie Down Anchors (6)
- Flasher (7)
- Trailer Brake Control (6)
- Tow Bar (5)
- Safety Chain (2)
- Leaf Spring Helper /Load Leveler Mounting Kits (4)
Towing FAQ
What hitch class do I need?
Match the class to the heavier of your trailer's loaded weight and tongue weight, using the lowest rating in the whole system. Class III and IV 2-inch receivers handle many campers and utility trailers, while heavy trailers may need Class V or a gooseneck. Confirm against your owner's manual.
Do I need a brake controller?
Many states require trailer brakes above a certain trailer weight, and the threshold varies by state. If your trailer has electric brakes, you need an in-cab controller wired to the vehicle. Check local regulations and the trailer manufacturer's guidance.
Can air springs increase my towing capacity?
No. Air springs and helper springs reduce sag and improve stability under load, but your towing and payload limits are set by the manufacturer. Staying within the ratings on the vehicle's label is still required for safe towing.
How do I choose a ball mount drop?
Park the loaded trailer level, then measure from the ground to the top of the receiver opening and to the underside of the coupler. The difference, adjusted for ball height, tells you the drop or rise needed to keep the trailer level.











