Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
Suspension Load Leveling Kits in the Towing section help a truck or SUV sit level when hauling a trailer or heavy cargo. This branch lists air spring kits, helper springs and leaf spring leveling kits from AirLift and Firestone Ride-Rite, along with a Daystar option. Open a product page for part numbers and features, then compare the products below.
Suspension Load Leveling Kit
Showing 1–12 of 190 resultsSorted by popularity
-
Load Leveling Kits & Components
Timbren SES Suspension Enhancement System – Rear – TORTUN4
- Timbren T/ITORTUN4 rear SES Suspension Enhancement System for Toyota Tacoma, Tundra and Nissan Titan pickups
- Rated at 6000 lbs capacity
- Fitment list gives specific years and trims for each model
- Replaces the jounce stop on the frame and the Tundra bumpstops
SKU: T/ITORTUN4 -
Load Leveling Kits & Components
Timbren SES Suspension Enhancement System – Rear – GMRCK25D
- Timbren T/IGMRCK25D rear SES Suspension Enhancement System for 2011-2021 GMC Sierra and Chevy Silverado 2500HD and 3500HD trucks
- Fitment field reads Universal Fit; no separate vehicle list is given
- Rated at 8600 lbs capacity
- Replaces the bumpstops and the jounce stop on the frame
SKU: T/IGMRCK25D -
Load Leveling Kits & Components
Timbren SES Suspension Enhancement System – Rear – GMRCK15S
- Timbren T/IGMRCK15S rear SES Suspension Enhancement System for Chevrolet Silverado 1500 and GMC Sierra 1500 pickups
- Rated at 8600 lbs capacity
- Hollow rubber springs that add resistance as weight rises
- Precision bent steel pieces, powder-coated
SKU: T/IGMRCK15S -
Load Leveling Kits & Components
Timbren SES Suspension Enhancement System – Rear – DR1500DQ
- Timbren DR1500DQ rear SES Suspension Enhancement System for 2012 and 2017–2021 Ram 1500 trucks, with the trims on the manufacturer list
- Rated at 8600 lbs capacity
- Replaces the bumpstops on the rear suspension
- Not compatible with Auto-Air levelling
SKU: T/IDR1500DQ -
Load Leveling Kits & Components
Timbren Rear Axle SES Suspension Upgrade – TORTUN4L
- Timbren T/ITORTUN4L rear SES Suspension Upgrade for Toyota Tacoma with OEM 3 leaf rear springs, plus Nissan Titan and Frontier
- Fitment field reads Universal Fit, and no model years are given
- Hollow rubber springs that stiffen under weight to resist rear end sag
- Welded, powder-coated steel pieces that replace the jounce stop on the frame
SKU: T/ITORTUN4L -
Load Leveling Kits & Components
Timbren Rear Axle SES Suspension Upgrade – TORTTNL
- Timbren Rear Axle SES Suspension Upgrade, part number T/ITORTTNL
- Rear rubber spring kit for the Toyota Tacoma pickup truck
- Rated at 5000 lbs capacity; GVWR is not increased
- Replaces the jounce stop on the frame
- No model years listed, so confirm fit for your truck
SKU: T/ITORTTNL -
Load Leveling Kits & Components
Timbren Rear Axle SES Suspension Upgrade – GMRCCA
- Timbren T/IGMRCCA rear SES Suspension Upgrade for Chevrolet Colorado and GMC Canyon pickups
- Fitment field reads Universal Fit, and no model years are given
- Hollow rubber springs with a rate that rises under towing and bed loads
- Laser cut steel pieces, powder-coated; replaces the jounce stop on the frame
SKU: T/IGMRCCA -
Load Leveling Kits & Components
Timbren Rear Axle SES Suspension Upgrade – FR1504R
- Rear SES suspension upgrade named for the Ford F-150 SVT Raptor 4×4 pickup
- Hollow rubber springs with a progressive spring rate
- Laser cut steel pieces, precision bent and powder-coated
- Replaces the jounce stop on the frame
- Confirm model years before ordering
SKU: T/IFR1504R -
Load Leveling Kits & Components
Timbren Rear Axle SES Suspension Upgrade – DR1500DS
- Rear SES suspension upgrade named for Ram 1500 Regular Cab pickup trucks
- Hollow rubber springs with a progressive spring rate
- Replaces the jounce stop on the frame
- Calls for a 1/2 in to 1-1/2 in gap between the rubber spring and axle
- Confirm model years against your truck before ordering.
SKU: T/IDR1500DS -
Load Leveling Kits & Components
Timbren Front Axle SES Suspension Upgrade – GMFK25S
- Front axle rubber spring upgrade for Chevrolet Silverado and GMC Sierra 1500, 2500 and 3500
- Hollow rubber springs, progressive spring rate
- Years not listed; confirm your vehicle before ordering
- Part number T/IGMFK25S
SKU: T/IGMFK25S -
Load Leveling Kits & Components
Timbren Front Axle SES Suspension Upgrade – GMFK15A
- Timbren front axle SES suspension upgrade, part T/IGMFK15A
- Hollow rubber springs with a progressive spring rate
- Built for Chevrolet Silverado 1500 and GMC Sierra 1500 front suspension
- Confirm model year before ordering
SKU: T/IGMFK15A -
Load Leveling Kits & Components
Timbren Front Axle SES Suspension Upgrade – FF550SDH
- Front SES suspension upgrade for Ford F-350, F-450 and F-550 cab and chassis trucks
- Hollow rubber springs with a progressive spring rate
- Laser cut steel pieces, precision welded and powder-coated
- Manufacturer fitment list covers 2005–2019 Ford F-350 Super Duty
- Rubber spring system for the front application
SKU: T/IFF550SDH
What load leveling kits do
When a trailer tongue or a bed full of cargo presses down on the rear axle, the back of the vehicle squats and the front rises. Headlights aim too high, steering feels light and the ride becomes less stable. A load leveling kit adds supplemental support so the vehicle sits closer to its normal ride height under load.
These kits support the factory springs rather than replacing them. They do not raise the vehicle's rated payload or towing capacity, which are set by the manufacturer.
Common kit types in this branch
- Air spring kits place an inflatable bladder inside a coil spring or between the frame and axle, with an air line and valve for adjusting pressure.
- Leaf spring leveling kits add an air bag to the rear leaf pack, designed for pickups and vans.
- Coil spring assist kits fit inside the existing coil to add support.
- Wireless or compressor-based systems let you adjust pressure from the cab instead of at the valve.
Key points to compare
Start with the vehicle application. Kits are engineered for specific frames, axles and suspension layouts, so confirm fitment for your exact year, make, model and drivetrain. Compare the pressure range, the stated load support, and whether an onboard compressor or manual valve is included.
Consider how often you tow. Occasional haulers can do well with a simple manual-fill kit, while frequent towers may prefer an adjustable system with a compressor and gauge for quick changes.
Installation and use
Most kits are bolt-on and need basic hand tools, a jack and jack stands, but they work on safety-critical suspension components. Follow the manufacturer's torque specifications, route air lines away from heat, sharp edges and moving parts, and check for leaks with soapy water.
Stay within the minimum and maximum pressures published for your kit. Inflating too high can damage the bag or affect ride and handling, and running too low can allow contact with other components. If you are not comfortable with the work, have a qualified shop install it.
Further checks and care
Questions to ask before you choose
Decide how much weight you carry and how often. Ask whether the vehicle already has aftermarket springs, a lift or an overload spring, since these change what a kit can do. Think about whether you want to adjust pressure from the driver's seat. Finally, check whether your trailer's tongue weight is within the hitch rating, because a kit cannot fix an overloaded vehicle or a trailer that is poorly balanced.
Measuring ride height and confirming fitment
Before installing, measure the distance from the center of each wheel hub to the fender lip with the vehicle empty and parked on level ground. Repeat when loaded to see how much it squats. This shows what adjustment you need and gives you a target after installation. Kit descriptions list the cab, bed length, axle and drive type they suit, and trucks with factory air suspension or a camper package often need a different part.
Inspection and mistakes to avoid
Check air springs periodically for rubbing, cuts, cracks or fading. Keep the bag from contacting sharp edges, and keep a minimum pressure in it to prevent folds from chafing. A common mistake is using the kit to carry more than the vehicle's rating, which strains brakes and tires. Another is forgetting to adjust pressure after unhitching, leading to a stiff ride. Never inflate past the printed maximum, and re-torque hardware after the first miles.
Related guides
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
Popular Suspension Load Leveling Kit brands
Suspension Load Leveling Kit FAQ
Will a load leveling kit increase my towing capacity?
No. Towing and payload ratings come from the vehicle manufacturer and depend on the frame, axles, brakes and hitch. A kit improves ride height and stability under load but does not change those ratings.
What air pressure should I run?
Use the range published by the kit maker, adjusting within it to bring the vehicle back to level under load. Keep a minimum pressure in the bag even when unloaded, as the instructions specify.
Can I use an air helper kit on a lifted truck?
Sometimes, but lift height, shock length and axle position affect fit. Check the kit's application notes against your suspension, and confirm clearance for the air spring through the full range of travel.












