Towing
Showing 13–24 of 1114 resultsSorted by popularity
-
-
Trailer Wire Adapter
Tow Ready 6-Way Round To 4-Way Flat Adapter – 118700
- Tow Ready 6-Way Round to 4-Way Flat trailer light adapter
- Part number TOW118700
- Plug-and-play: plugs into the factory harness and has a pigtail for trailer lights
- Marked Universal Fit; no vehicle years, makes or models are listed
SKU: TOW118700 -
Load Leveling Kits & Components
Timbren SES Suspension Enhancement System – Rear – TORTUN4
- Timbren T/ITORTUN4 rear SES Suspension Enhancement System for Toyota Tacoma, Tundra and Nissan Titan pickups
- Rated at 6000 lbs capacity
- Fitment list gives specific years and trims for each model
- Replaces the jounce stop on the frame and the Tundra bumpstops
SKU: T/ITORTUN4 -
Load Leveling Kits & Components
Timbren SES Suspension Enhancement System – Rear – GMRCK25D
- Timbren T/IGMRCK25D rear SES Suspension Enhancement System for 2011-2021 GMC Sierra and Chevy Silverado 2500HD and 3500HD trucks
- Fitment field reads Universal Fit; no separate vehicle list is given
- Rated at 8600 lbs capacity
- Replaces the bumpstops and the jounce stop on the frame
SKU: T/IGMRCK25D -
Load Leveling Kits & Components
Timbren SES Suspension Enhancement System – Rear – GMRCK15S
- Timbren T/IGMRCK15S rear SES Suspension Enhancement System for Chevrolet Silverado 1500 and GMC Sierra 1500 pickups
- Rated at 8600 lbs capacity
- Hollow rubber springs that add resistance as weight rises
- Precision bent steel pieces, powder-coated
SKU: T/IGMRCK15S -
Load Leveling Kits & Components
Timbren SES Suspension Enhancement System – Rear – DR1500DQ
- Timbren DR1500DQ rear SES Suspension Enhancement System for 2012 and 2017–2021 Ram 1500 trucks, with the trims on the manufacturer list
- Rated at 8600 lbs capacity
- Replaces the bumpstops on the rear suspension
- Not compatible with Auto-Air levelling
SKU: T/IDR1500DQ -
Load Leveling Kits & Components
Timbren Rear Axle SES Suspension Upgrade – TORTUN4L
- Timbren T/ITORTUN4L rear SES Suspension Upgrade for Toyota Tacoma with OEM 3 leaf rear springs, plus Nissan Titan and Frontier
- Fitment field reads Universal Fit, and no model years are given
- Hollow rubber springs that stiffen under weight to resist rear end sag
- Welded, powder-coated steel pieces that replace the jounce stop on the frame
SKU: T/ITORTUN4L -
Load Leveling Kits & Components
Timbren Rear Axle SES Suspension Upgrade – TORTTNL
- Timbren Rear Axle SES Suspension Upgrade, part number T/ITORTTNL
- Rear rubber spring kit for the Toyota Tacoma pickup truck
- Rated at 5000 lbs capacity; GVWR is not increased
- Replaces the jounce stop on the frame
- No model years listed, so confirm fit for your truck
SKU: T/ITORTTNL -
Load Leveling Kits & Components
Timbren Rear Axle SES Suspension Upgrade – GMRCCA
- Timbren T/IGMRCCA rear SES Suspension Upgrade for Chevrolet Colorado and GMC Canyon pickups
- Fitment field reads Universal Fit, and no model years are given
- Hollow rubber springs with a rate that rises under towing and bed loads
- Laser cut steel pieces, powder-coated; replaces the jounce stop on the frame
SKU: T/IGMRCCA
What belongs in a towing setup
A complete tow setup has several links: a hitch mounted to the vehicle, a ball mount or head, a coupler-compatible ball, wiring, and, for heavier trailers, a brake controller and some form of suspension support. Weak or mismatched parts in any link limit the whole system, so it helps to think of the setup as a chain rather than a shopping list of separate items.
This category spans bolt-on receiver hitches, drop and adjustable ball mounts, gooseneck and fifth wheel mounting hardware, hitch pins and locks, trailer wiring connectors, mud flaps, and air or leaf-spring helpers that firm up the rear of a loaded truck.
Know your ratings first
Start with the numbers on your vehicle's door-jamb label and in the owner's manual: gross vehicle weight rating, gross combined weight rating, and the maximum tow rating. Every component, including the hitch class, ball mount, ball, pin, and trailer coupler, has its own rating, and your usable capacity is the lowest of them all.
Tongue weight matters as much as total weight. A trailer that is too light on the tongue can sway, while one that is too heavy overloads the rear axle and lifts weight off the front wheels. Many tow guides suggest roughly 10 to 15 percent of trailer weight on conventional trailers, but follow the manufacturer's numbers.
Matching hitch type to the job
- Receiver hitches come in classes, commonly I through V, with larger classes using 2-inch or 2.5-inch receiver openings and higher ratings.
- Gooseneck and fifth wheel hitches mount in the truck bed and suit heavy livestock, equipment, and RV trailers.
- Weight-distributing hitches and sway control spread tongue weight across the axles of the tow vehicle and trailer.
- Drop and rise ball mounts level the trailer so the coupler sits at the right height.
Measure from the ground to the top of the receiver and to the coupler of a level trailer before choosing a drop or rise.
Supporting the load and installing safely
Air springs, helper leaf springs, and similar load-leveling kits reduce rear sag when the truck is loaded. They do not raise the vehicle's rated capacity, so never treat them as a way to exceed the ratings on the label.
Many hitches bolt to existing frame holes, but some require drilling, trimming plastic, or removing exhaust parts. Use a torque wrench, follow the specified bolt torque, and recheck after the first few trips. Confirm fitment for your exact year, make, and model, and check the manufacturer's specifications before installing. Professional installation is sensible for gooseneck, fifth wheel, and brake controller wiring.
Common mistakes to avoid
Towing problems usually come from mismatched parts rather than a single bad component. Typical errors include using a ball that is rated below the trailer, ignoring tongue weight, skipping safety chains, and forgetting to confirm that the wiring connector matches the trailer plug.
Before every trip, walk around the rig: check the coupler latch and pin, chain crossing, light function, tire pressure on both vehicles, and brake controller gain. Lock the hitch pin when parked to deter theft.
Popular Towing brands
- Curt Manufacturing (269)
- AirLift (123)
- B&W Hitch (117)
- Firestone Ride-Rite (99)
- DrawTite (67)
- BOLT Lock (58)
- Weigh Safe Hitches (38)
- Smittybilt (37)
- Fastway Trailer Products (31)
- Supersprings (31)
- Husky Liners (26)
- Trimax Locks (22)
Shop Towing by type
- Suspension Load Leveling Kit (190)
- Hitches (200)
- Trailer Hitch Ball Mount (90)
- Brake Controllers & Electrical (118)
- Drop Hitches & Ball Mounts (86)
- Load Leveling Kits & Components (78)
- Trailer Hitch Pin Lock (47)
- Mud Flaps (43)
- Towing Accessories (49)
- Gooseneck Trailer Hitch (34)
- Leaf Spring Helper (26)
- Cargo Management (79)
- Gooseneck Trailer Hitch Mount Kit (16)
- Trailer Hitch Pin (14)
- Fifth Wheel Trailer Hitch Mount Kit (12)
- Truck Bed Cargo Organizer (9)
- Padlock (11)
- Trailer Wire Adapter (10)
- Trailer Hitch Covers (15)
- Fifth Wheel Trailer Hitch Bracket (7)
- Truck Tool Box Lock (8)
- Tow Bar Mounting Hardware (7)
- Fifth Wheel Trailer Hitch Slider (7)
- Trailer Wire Connector (5)
- Tie Down Anchors (6)
- Flasher (7)
- Trailer Brake Control (6)
- Tow Bar (5)
- Safety Chain (2)
- Leaf Spring Helper /Load Leveler Mounting Kits (4)
Towing FAQ
What hitch class do I need?
Match the class to the heavier of your trailer's loaded weight and tongue weight, using the lowest rating in the whole system. Class III and IV 2-inch receivers handle many campers and utility trailers, while heavy trailers may need Class V or a gooseneck. Confirm against your owner's manual.
Do I need a brake controller?
Many states require trailer brakes above a certain trailer weight, and the threshold varies by state. If your trailer has electric brakes, you need an in-cab controller wired to the vehicle. Check local regulations and the trailer manufacturer's guidance.
Can air springs increase my towing capacity?
No. Air springs and helper springs reduce sag and improve stability under load, but your towing and payload limits are set by the manufacturer. Staying within the ratings on the vehicle's label is still required for safe towing.
How do I choose a ball mount drop?
Park the loaded trailer level, then measure from the ground to the top of the receiver opening and to the underside of the coupler. The difference, adjusted for ball height, tells you the drop or rise needed to keep the trailer level.











