Towing
Showing 61–72 of 1114 resultsSorted by popularity
-
Trailer Hitch Ball Cover
Rightline Gear Anti-Theft Trailer Coupler Ball & Lock – 100T12
- Anti-theft trailer coupler ball with coupler lock, part R/G100T12
- Polycarbonate ball fills the hitch socket to deter tow-away
- Once secured by the trailer coupler lock, the ball cannot be broken or removed
- UV-protected zip tie attaches the ball to the trailer chain
- Sold as a universal-fit trailer accessory; the ball alone is part 100T10
SKU: R/G100T12 -
Cargo Box
Rhino-Rack MasterFit Roof Box – RMFT440
- Rhino-Rack MasterFit roof box, part number RHORMFT440 (model RMFT440)
- 75 kg carrying capacity
- Twist to tighten and press to lock MasterFit clamping
- Fits Rhino-Rack Vortex and Euro systems directly
- Heavy Duty bars need the RUBK-MF fitting kit; crossbar spacing 620 mm to 930 mm
SKU: RHORMFT440 -
-
-
-
-
-
Trailer Brake Controlers
Redarc Tow-Pro Toyota Switch Insert Panel – TPSI-011
- Redarc Tow-Pro Toyota Switch Insert Panel, model TPSI-011, part number RAETPSI-011
- Replaces the switch blank in the front console of new Toyota vehicles
- Aids installation of Tow-Pro Elite and Tow-Pro Liberty brake controllers
SKU: RAETPSI-011 -
Trailer Brake Controlers
Redarc Tow-Pro Switch Insert Panel – TPSI-003
- Fits the 2012 and 2015–2016 Chevrolet Colorado and GMC Canyon in the manufacturer fitment list
- Switch insert panel for the Tow-Pro Electric Brake Remote Head
- Part number RAETPSI-003 (model TPSI-003)
- CARB EO Number A-2020-113
SKU: RAETPSI-003 -
Trailer Brake Controlers
Redarc Tow-Pro Switch Insert Panel – TPSI-002
- Fits 2006–2019 Toyota and 2016–2019 Mitsubishi models in the manufacturer fitment list
- Switch insert panel for the Tow-Pro Electric Brake Remote Head
- Creates an OE-style remote head mount
- Part number RAETPSI-002 (model TPSI-002)
SKU: RAETPSI-002
What belongs in a towing setup
A complete tow setup has several links: a hitch mounted to the vehicle, a ball mount or head, a coupler-compatible ball, wiring, and, for heavier trailers, a brake controller and some form of suspension support. Weak or mismatched parts in any link limit the whole system, so it helps to think of the setup as a chain rather than a shopping list of separate items.
This category spans bolt-on receiver hitches, drop and adjustable ball mounts, gooseneck and fifth wheel mounting hardware, hitch pins and locks, trailer wiring connectors, mud flaps, and air or leaf-spring helpers that firm up the rear of a loaded truck.
Know your ratings first
Start with the numbers on your vehicle's door-jamb label and in the owner's manual: gross vehicle weight rating, gross combined weight rating, and the maximum tow rating. Every component, including the hitch class, ball mount, ball, pin, and trailer coupler, has its own rating, and your usable capacity is the lowest of them all.
Tongue weight matters as much as total weight. A trailer that is too light on the tongue can sway, while one that is too heavy overloads the rear axle and lifts weight off the front wheels. Many tow guides suggest roughly 10 to 15 percent of trailer weight on conventional trailers, but follow the manufacturer's numbers.
Matching hitch type to the job
- Receiver hitches come in classes, commonly I through V, with larger classes using 2-inch or 2.5-inch receiver openings and higher ratings.
- Gooseneck and fifth wheel hitches mount in the truck bed and suit heavy livestock, equipment, and RV trailers.
- Weight-distributing hitches and sway control spread tongue weight across the axles of the tow vehicle and trailer.
- Drop and rise ball mounts level the trailer so the coupler sits at the right height.
Measure from the ground to the top of the receiver and to the coupler of a level trailer before choosing a drop or rise.
Supporting the load and installing safely
Air springs, helper leaf springs, and similar load-leveling kits reduce rear sag when the truck is loaded. They do not raise the vehicle's rated capacity, so never treat them as a way to exceed the ratings on the label.
Many hitches bolt to existing frame holes, but some require drilling, trimming plastic, or removing exhaust parts. Use a torque wrench, follow the specified bolt torque, and recheck after the first few trips. Confirm fitment for your exact year, make, and model, and check the manufacturer's specifications before installing. Professional installation is sensible for gooseneck, fifth wheel, and brake controller wiring.
Common mistakes to avoid
Towing problems usually come from mismatched parts rather than a single bad component. Typical errors include using a ball that is rated below the trailer, ignoring tongue weight, skipping safety chains, and forgetting to confirm that the wiring connector matches the trailer plug.
Before every trip, walk around the rig: check the coupler latch and pin, chain crossing, light function, tire pressure on both vehicles, and brake controller gain. Lock the hitch pin when parked to deter theft.
Popular Towing brands
- Curt Manufacturing (269)
- AirLift (123)
- B&W Hitch (117)
- Firestone Ride-Rite (99)
- DrawTite (67)
- BOLT Lock (58)
- Weigh Safe Hitches (38)
- Smittybilt (37)
- Fastway Trailer Products (31)
- Supersprings (31)
- Husky Liners (26)
- Trimax Locks (22)
Shop Towing by type
- Suspension Load Leveling Kit (190)
- Hitches (200)
- Trailer Hitch Ball Mount (90)
- Brake Controllers & Electrical (118)
- Drop Hitches & Ball Mounts (86)
- Load Leveling Kits & Components (78)
- Trailer Hitch Pin Lock (47)
- Mud Flaps (43)
- Towing Accessories (49)
- Gooseneck Trailer Hitch (34)
- Leaf Spring Helper (26)
- Cargo Management (79)
- Gooseneck Trailer Hitch Mount Kit (16)
- Trailer Hitch Pin (14)
- Fifth Wheel Trailer Hitch Mount Kit (12)
- Truck Bed Cargo Organizer (9)
- Padlock (11)
- Trailer Wire Adapter (10)
- Trailer Hitch Covers (15)
- Fifth Wheel Trailer Hitch Bracket (7)
- Truck Tool Box Lock (8)
- Tow Bar Mounting Hardware (7)
- Fifth Wheel Trailer Hitch Slider (7)
- Trailer Wire Connector (5)
- Tie Down Anchors (6)
- Flasher (7)
- Trailer Brake Control (6)
- Tow Bar (5)
- Safety Chain (2)
- Leaf Spring Helper /Load Leveler Mounting Kits (4)
Towing FAQ
What hitch class do I need?
Match the class to the heavier of your trailer's loaded weight and tongue weight, using the lowest rating in the whole system. Class III and IV 2-inch receivers handle many campers and utility trailers, while heavy trailers may need Class V or a gooseneck. Confirm against your owner's manual.
Do I need a brake controller?
Many states require trailer brakes above a certain trailer weight, and the threshold varies by state. If your trailer has electric brakes, you need an in-cab controller wired to the vehicle. Check local regulations and the trailer manufacturer's guidance.
Can air springs increase my towing capacity?
No. Air springs and helper springs reduce sag and improve stability under load, but your towing and payload limits are set by the manufacturer. Staying within the ratings on the vehicle's label is still required for safe towing.
How do I choose a ball mount drop?
Park the loaded trailer level, then measure from the ground to the top of the receiver opening and to the underside of the coupler. The difference, adjusted for ball height, tells you the drop or rise needed to keep the trailer level.











