Select your vehicle

Hitches

Trailer hitches in this section include receiver hitches, gooseneck hitches and install kits, weight-distribution parts, and fifth wheel components. They are for owners who need a rear mount for a trailer, bike rack, or cargo carrier on a truck, SUV, or Jeep. Top brands include Curt Manufacturing, B&W Hitch, and DrawTite. Each product page lists part numbers and fitment details.

B&W Class V heavy-duty 2-inch rear receiver hitch in black

A hitch is the link between your rig and whatever it pulls or carries, from a utility trailer or camper to a bike rack or cargo tray. This section covers bolt-on receivers front and rear, in-bed gooseneck and fifth wheel systems, pintle mounts and the weight distribution parts that steady a heavy tongue.

Receiver hitches make up about two thirds of the listings and are sold by vehicle and class. Gooseneck and fifth wheel gear splits into the hitch itself, the head unit, the base or rails and the truck-specific install kit, so check which pieces you already have. Weight distribution parts include spring bars, trunnions, brackets and sway control. Adapters and coupler locks round out the group.

147Parts listed
13Part types
10Brands
98Receiver hitches
2" x 2"Most common receiver
10–15%Typical tongue weight

Shop hitches by type

Popular hitches and hitch parts

Hitch class and rating reference

Typical receiver class limits and the ratings printed on the heavy-duty gear in this section. Your actual limit is the lowest rating among the vehicle, hitch, ball mount, ball and coupler.

Receiver hitch classes (typical)

Trailer weightTongue weightReceiver
Class IUp to 2,000 lbUp to 200 lb1-1/4"
Class IIUp to 3,500 lbUp to 350 lb1-1/4"
Class IIIUp to 8,000 lbUp to 800 lb2"
Class IVUp to 10,000 lbUp to 1,000 lb2"
Class VOver 10,000 lbOver 1,000 lb2", 2-1/2" or 3"

How each hitch type couples

CouplingMounted at
Receiver hitchBall mount or accessory shankRear or front frame
GooseneckBall in the bed, coupler on trailerOver or ahead of rear axle
Fifth wheelKingpin into a jawed headOver or ahead of rear axle
PintleHook and lunette ringReceiver or frame plate

Weight distribution parts

  • Spring bars: round or trunnion style, rated by tongue weight
  • Head assembly: holds the ball and bar sockets, sets tilt
  • Frame brackets: clamp to the trailer frame to hold the bars
  • Friction sway control: a pad or bar that resists trailer sway
  • Washers and shims: fine-tune head angle

Ratings named in these listings

B&W Patriot 5th wheel16,000 lb (16K)
B&W Companion bases20K and 25K versions
Curt Q20 head unit20,000 lb gross trailer weight
Curt Q24 head unit24,000 lb gross trailer weight
Curt A25 5th wheel25,000 lb class
Fastway Equal-i-zer 4-point4,000 lb version

Hitch pin sizes

1-1/4" receiver1/2" pin
2" receiver5/8" pin
2-1/2" receiver5/8" pin
Pin lengthMust span the receiver with room for the clip

Measure before ordering

  • Receiver height: ground to the top of the opening, unloaded
  • Trailer coupler height when level, to choose rise or drop
  • Roll pan, spare tire, exhaust tip and sensor locations
  • Bed length, cab style and frame type for in-bed install kits
  • Existing factory puck or rail system in the bed

Class figures are typical industry values. The rating stamped on your hitch and the limits in your owner's manual always take priority.

All Hitches 200 parts

Showing 1–12 of 200 resultsSorted by popularity

Receiver hitch basics

A receiver hitch is a steel frame that bolts to the tow vehicle and presents a square opening for a ball mount, bike rack, or cargo carrier. Classes describe capacity and opening size. Class II typically uses a 1-1/4 inch receiver, while Class III, IV, and V commonly use 2-inch or larger openings with progressively higher ratings.

Most hitches here are vehicle-specific, which means the mounting points, bracket shape, and tailpipe clearance are designed for a given model. Multi-fit styles cover several vehicles but may need more care during installation.

Gooseneck and fifth wheel

Gooseneck and fifth wheel hitches mount to the truck frame under the bed and carry weight over or just ahead of the rear axle, which improves stability for heavy trailers. Look for in-bed ball mounts, install kits that fit your truck's frame, and handles, wedges, or adapters for existing rails.

Install kits and brackets are usually specific to a truck make, cab, and bed length. Compare part numbers carefully before choosing.

Choosing the right rating

  • Check the vehicle's maximum tow rating and tongue weight rating in the owner's manual.
  • Pick a hitch whose rated capacity meets or exceeds your trailer, but remember the lowest rating in the system governs.
  • Consider weight distribution and sway control when trailer weight approaches the vehicle's limit.
  • Look at features such as roll pan clearance, finish, and whether wiring is included.

Installing safely

Many hitches bolt into factory frame holes without drilling, though some need exhaust or bumper adjustments. Use the torque values the manufacturer specifies, support the hitch while you tighten fasteners, and recheck bolts after your first towing trips. For gooseneck and fifth wheel gear, professional installation is a sound choice because bed drilling and frame bracing are involved. Confirm fitment for your exact year, make, and model.

Pre-trip checks and common mistakes

A hitch is only as safe as its last inspection. Look over the welds and finish for cracks or rust, confirm every bolt is tight, and make sure the pin and clip are the correct size for the receiver. A loose-fitting ball mount can rattle, so some owners use an anti-rattle device or locking pin.

Common mistakes include forgetting to count the weight of cargo in the trailer, using a 1-1/4 inch receiver for loads that need a 2-inch one, and ignoring the ball height. Keep a written record of your vehicle's and trailer's ratings in the glovebox.

It also helps to know the parts around the hitch. A ball mount slides into the receiver and is secured by a pin and clip. The ball threads into the mount, and its shank diameter, commonly 3/4, 1, or 1-1/4 inch, must match the hole in the mount. The ball diameter, often 1-7/8, 2, or 2-5/16 inches, must match the trailer coupler. Check the rating stamped on each part.

Wiring is separate from the hitch. Most trailers use a 4-pin or 7-pin connector, and adapters are common. Safety chains should cross under the tongue and attach to the vehicle's chain loops, not the ball mount.

Finally, think about corrosion. Hitches live under the rear bumper where road salt and water collect. Touch up chips with paint, keep the receiver interior lightly greased, and pull the pin occasionally so it does not seize in place.

Popular Hitches brands

Hitches FAQ

What is the difference between Class III and Class IV hitches?

Both usually use a 2-inch receiver, but Class IV has a higher rating than Class III. Exact ratings vary by manufacturer and by whether you use weight distribution, so check the specifications on the product and your vehicle's own tow rating.

Will a hitch fit with a roll pan?

Not always. Some hitches are designed to clear a roll pan and others are not. Listings sometimes state this directly. Check the fitment notes, and confirm against your exact year, make, and model.

What does a weight distributing hitch do?

It uses spring bars to spread part of the tongue weight to the tow vehicle's front axle and the trailer axles. This helps level the vehicle and can improve steering feel and braking when towing heavier trailers.

Can I install a hitch myself?

Many bolt-on receiver hitches are manageable with basic tools, a torque wrench, and a helper. Gooseneck and fifth wheel installs are more involved and often benefit from professional installation. Follow the maker's instructions and torque specifications.