Overview
The DrawTite 24772 is a Class I Sportframe rear trailer hitch for the 2002-2006 Honda CR-V. It has a 1.25 inch by 1.25 inch receiver and does not fit with a roll pan.
The hitch is all-welded and built to fit the 2002-2006 CR-V without adapters. It is a Class I hitch and carries a nationwide lifetime warranty. Towing capacities are unknown here, so confirm your vehicle’s towing limits before hooking up a trailer.
Key features
- Class I Sportframe trailer hitch
- Rear mounting
- 1.25 inch by 1.25 inch receiver
- All-welded construction.
- Built to fit a specific vehicle without adapters
- Does not fit with a roll pan
- Lifetime warranty.
Towing with a Class I hitch
A Class I hitch suits light loads such as a small cargo carrier, a bike rack or a light utility trailer. Its role is limited, so the sensible approach is to match the load to the hitch and the vehicle rather than the other way around. A hitch used only for accessories still needs the same bolt checks as a trailer hitch.
Tongue weight matters as much as the total load. A heavy load placed too far back can lift the front of the vehicle, reduce steering control and strain the hitch. Keep loads centered and secured, and check that the hitch pin and ball mount, if you use one, are tight before each trip.
- Check bolt torque after the first few trips
- Inspect the receiver for rust or cracks
- Use a hitch pin that fits the receiver tube
- Keep a hitch cover on when the receiver is not in use
Specifications
| Brand | DrawTite |
|---|---|
| Part number | DRA24772 (24772) |
| Product type | Class I Sportframe trailer hitch |
| Mounting location | Rear |
| Receiver size | 1.25 inches x 1.25 inches |
| Weight class | Class I |
| Fits with roll pan | Does not fit with roll pan |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2002-2006 Honda CR-V in the EX, LX and SE trims.
It does not fit other Honda models or CR-V years outside 2002-2006. Match the year, model and trim to your vehicle before ordering.
Installation notes
A trailer hitch carries towing loads, so follow the installation steps closely and tighten every bolt to the specified torque. Support the vehicle securely if work under it is needed, and consider professional installation if you are unsure. Re-check the bolts after the first few miles of driving and again after towing. Never exceed the tow ratings of the vehicle or hitch, and confirm compatibility with any roll pan or rear trim.
What’s included
Check the hardware you have against the installation steps before starting.












