Overview
The CRT45143 is a RockerBall cushion hitch with a 2 inch trailer ball and a 3 inch drop, rated 7,500 lb. It fits most class 3, class 4 and class 5 receiver hitches with a standard 2 inch shank. It is universal fit, so the receiver class and shank size decide compatibility rather than the vehicle model. The cushion isolator built into the hitch ball separates it from a standard ball mount.
Trailer movement over bumps and potholes sends vibration, jolting, chucking and noise through a metal-on-metal ball mount to the tow vehicle. The RockerBall absorbs that erratic movement and rattling at the coupling point, which Curt says gives a smoother ride, more control and less stress on the vehicle, receiver hitch, brakes and suspension. ShockDrop is the name Curt uses for this technology.
Key features
- Integrated cushion isolator turns the standard ball mount into a cushion hitch
- Anti-rattle capability, with an anti-rattle shim kit included for vibration resistance
- Absorbs trailer movement at the coupling point for a smoother ride
- No airbags or bearings to service
- Integrated zerk fitting for grease as needed
- Forged steel ball with chrome plating; base and ball mount powder coated
Why a cushion isolator helps
A standard ball mount transfers every bump and jolt from the trailer straight into the receiver. A cushion isolator sits between the ball and the shank so that movement is absorbed at the coupling point instead. The result is less rattle and fewer shocks reaching the tow vehicle, which helps the receiver and suspension last longer.
Routine care for a cushion hitch is simple, but it matters. Keep the zerk fitting greased, wipe away road grit and check the isolator for splitting or flattening. Make sure the anti-rattle shim is seated before towing, and confirm that the receiver rating and the hitch rating both cover the trailer’s weight.
- Grease the zerk fitting as needed
- Inspect the isolator for cracks
- Confirm receiver class before installing
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT45143 |
| Trailer ball size | 2 inch |
| Drop | 3 inch |
| Shank size | 2 inch |
| Shank hole size | 2 inch |
| Weight rating | 7,500 LBS |
| Finish | Black |
| Ball construction | Forged steel with chrome plating |
| Fitment | Universal fit |
Vehicle fitment
This hitch is universal fit and is not built for a specific vehicle. Compatibility is set by receiver class and shank: the standard 2 inch shank is meant for most class 3, class 4 and class 5 receiver hitches. Check the 7,500 lb rating against your receiver’s own rating.
Universal fit means no year, model or trim list applies. Confirm your receiver class, shank size and trailer weight before you install.
Installation notes
Keep the integrated zerk fitting greased as needed for continuous lubrication and smooth operation. The kit includes an anti-rattle shim kit for maximum vibration resistance. With no airbags or bearings, routine care is grease only.
What’s included
The kit includes a standard ball mount with a 3 inch drop and standard 2 inch shank, a 2 inch trailer ball, and an anti-rattle shim kit.
















