Towing
Showing 49–60 of 1114 resultsSorted by popularity
-
Leaf Spring Helper
SuperSprings Leaf Helper Spring – SSA22.5
- SuperSprings leaf helper spring, part number SPRSSA22.5, for vehicles with rear leaf springs
- Fits Ford F-Series, E-350 and Super Duty, Chevrolet and GMC 3500, and Dodge Ram trucks from 1980 to 2021
- Made in the U.S.A. from SAE5160H high grade, shot peened steel
- Self-adjusting design described to level loads and reduce body roll
SKU: SPRSSA22.5 -
Receiver Hitches
Smittybilt Class 2 Trailer Hitch with 2″ Receiver – JH46
- Fits 2018–2026 Jeep Wrangler JL two-door and four-door models in the named versions
- Class 2 trailer hitch with a 2-inch receiver, gloss black powder coat
- Fits OE style rear bumpers with bolt-on installation
- Two-door rated 2500 lb gross trailer weight; four-door rated 3500 lb
SKU: S/BJH46 -
-
-
-
Truck Bed Cargo Organizer
Roll N Lock Cargo Manager Rolling Truck Bed Divider – CM530
- Fits 2016–2023 Toyota Tacoma in several trims
- Part number RNLCM530, a movable rolling truck bed divider
- Driver’s-side controls move the divider along the bed
- Spring-activated pins lock the divider into the next slot
- Companion to Roll N Lock retractable tonneau covers
SKU: RNLCM530 -
Truck Bed Cargo Organizer
Roll N Lock Cargo Manager Rolling Truck Bed Divider – CM448
- Fits Dodge Ram 1500, 2500 and 3500 pickups, 2009–2024
- Part number RNLCM448, a movable rolling truck bed divider
- Driver’s-side levers reposition the divider along the side tracks
- Spring mechanism pins the divider into the next nearest slot
- Companion to Roll N Lock retractable tonneau covers
SKU: RNLCM448 -
Truck Bed Cargo Organizer
Roll N Lock Cargo Manager Rolling Truck Bed Divider – CM221
- Fits selected 2014–2019 Chevrolet Silverado and GMC Sierra full-size and heavy-duty pickups
- Part number RNLCM221, a rolling truck bed divider
- Levers at the driver’s side move the divider between slots
- Spring-loaded pins engage the next nearest slot
- Designed to complement Roll N Lock retractable tonneau covers
SKU: RNLCM221 -
Truck Bed Cargo Organizer
Roll N Lock Cargo Manager Rolling Truck Bed Divider – CM151
- Fits the 2017–2022 Ford F-250 and F-350 Super Duty in several trims
- Part number RNLCM151, a movable rolling truck bed divider
- Driver’s-side squeeze levers reposition the divider along the bed side tracks
- Spring-activated pins lock into the next nearest slot
- Optional companion to Roll N Lock retractable tonneau covers
SKU: RNLCM151
What belongs in a towing setup
A complete tow setup has several links: a hitch mounted to the vehicle, a ball mount or head, a coupler-compatible ball, wiring, and, for heavier trailers, a brake controller and some form of suspension support. Weak or mismatched parts in any link limit the whole system, so it helps to think of the setup as a chain rather than a shopping list of separate items.
This category spans bolt-on receiver hitches, drop and adjustable ball mounts, gooseneck and fifth wheel mounting hardware, hitch pins and locks, trailer wiring connectors, mud flaps, and air or leaf-spring helpers that firm up the rear of a loaded truck.
Know your ratings first
Start with the numbers on your vehicle's door-jamb label and in the owner's manual: gross vehicle weight rating, gross combined weight rating, and the maximum tow rating. Every component, including the hitch class, ball mount, ball, pin, and trailer coupler, has its own rating, and your usable capacity is the lowest of them all.
Tongue weight matters as much as total weight. A trailer that is too light on the tongue can sway, while one that is too heavy overloads the rear axle and lifts weight off the front wheels. Many tow guides suggest roughly 10 to 15 percent of trailer weight on conventional trailers, but follow the manufacturer's numbers.
Matching hitch type to the job
- Receiver hitches come in classes, commonly I through V, with larger classes using 2-inch or 2.5-inch receiver openings and higher ratings.
- Gooseneck and fifth wheel hitches mount in the truck bed and suit heavy livestock, equipment, and RV trailers.
- Weight-distributing hitches and sway control spread tongue weight across the axles of the tow vehicle and trailer.
- Drop and rise ball mounts level the trailer so the coupler sits at the right height.
Measure from the ground to the top of the receiver and to the coupler of a level trailer before choosing a drop or rise.
Supporting the load and installing safely
Air springs, helper leaf springs, and similar load-leveling kits reduce rear sag when the truck is loaded. They do not raise the vehicle's rated capacity, so never treat them as a way to exceed the ratings on the label.
Many hitches bolt to existing frame holes, but some require drilling, trimming plastic, or removing exhaust parts. Use a torque wrench, follow the specified bolt torque, and recheck after the first few trips. Confirm fitment for your exact year, make, and model, and check the manufacturer's specifications before installing. Professional installation is sensible for gooseneck, fifth wheel, and brake controller wiring.
Common mistakes to avoid
Towing problems usually come from mismatched parts rather than a single bad component. Typical errors include using a ball that is rated below the trailer, ignoring tongue weight, skipping safety chains, and forgetting to confirm that the wiring connector matches the trailer plug.
Before every trip, walk around the rig: check the coupler latch and pin, chain crossing, light function, tire pressure on both vehicles, and brake controller gain. Lock the hitch pin when parked to deter theft.
Popular Towing brands
- Curt Manufacturing (269)
- AirLift (123)
- B&W Hitch (117)
- Firestone Ride-Rite (99)
- DrawTite (67)
- BOLT Lock (58)
- Weigh Safe Hitches (38)
- Smittybilt (37)
- Fastway Trailer Products (31)
- Supersprings (31)
- Husky Liners (26)
- Trimax Locks (22)
Shop Towing by type
- Suspension Load Leveling Kit (190)
- Hitches (200)
- Trailer Hitch Ball Mount (90)
- Brake Controllers & Electrical (118)
- Drop Hitches & Ball Mounts (86)
- Load Leveling Kits & Components (78)
- Trailer Hitch Pin Lock (47)
- Mud Flaps (43)
- Towing Accessories (49)
- Gooseneck Trailer Hitch (34)
- Leaf Spring Helper (26)
- Cargo Management (79)
- Gooseneck Trailer Hitch Mount Kit (16)
- Trailer Hitch Pin (14)
- Fifth Wheel Trailer Hitch Mount Kit (12)
- Truck Bed Cargo Organizer (9)
- Padlock (11)
- Trailer Wire Adapter (10)
- Trailer Hitch Covers (15)
- Fifth Wheel Trailer Hitch Bracket (7)
- Truck Tool Box Lock (8)
- Tow Bar Mounting Hardware (7)
- Fifth Wheel Trailer Hitch Slider (7)
- Trailer Wire Connector (5)
- Tie Down Anchors (6)
- Flasher (7)
- Trailer Brake Control (6)
- Tow Bar (5)
- Safety Chain (2)
- Leaf Spring Helper /Load Leveler Mounting Kits (4)
Towing FAQ
What hitch class do I need?
Match the class to the heavier of your trailer's loaded weight and tongue weight, using the lowest rating in the whole system. Class III and IV 2-inch receivers handle many campers and utility trailers, while heavy trailers may need Class V or a gooseneck. Confirm against your owner's manual.
Do I need a brake controller?
Many states require trailer brakes above a certain trailer weight, and the threshold varies by state. If your trailer has electric brakes, you need an in-cab controller wired to the vehicle. Check local regulations and the trailer manufacturer's guidance.
Can air springs increase my towing capacity?
No. Air springs and helper springs reduce sag and improve stability under load, but your towing and payload limits are set by the manufacturer. Staying within the ratings on the vehicle's label is still required for safe towing.
How do I choose a ball mount drop?
Park the loaded trailer level, then measure from the ground to the top of the receiver opening and to the underside of the coupler. The difference, adjusted for ball height, tells you the drop or rise needed to keep the trailer level.











