Overview
Curt Manufacturing’s Wiring T-Connectors, part number CRT56236, plug straight into a factory harness and come with a 4 pin connector, dust cap and ground wire.
Key features
- Plugs straight into a factory harness
- Comes with a 4 pin connector
- Comes with a dust cap
- Comes with a ground wire and self tapping screw
Choosing and fitting T-connectors
T-connectors suit simple accessory circuits where a clean, reversible connection is preferred over cutting and splicing wire. The factory harness sets the limits, so identify the circuit, its function and its approximate load before choosing a tap point. Wire color charts help, but a meter check of each pin is the more reliable way to confirm the circuit.
Keep the dust cap in place on any unused connector to keep out road grime and moisture. Route the tapped wire with slack and clips so it cannot rub on edges or pull on the connection, and seal the joint if it sits in a wet area. A ground should always go to clean bare metal.
Recheck the connection after the first week of use. Corrosion at the pins, a dust cap that has come loose, or a ground screw that has backed out are common causes of faults that appear later.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT56236 |
| Connector | 4 pin |
| Included | Dust cap; ground wire with self tapping screw |
Vehicle fitment
Curt gives no vehicle years, models or trims for this T-connector set and marks it universal fit. Its fit depends on the factory harness it plugs into.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Attach the ground wire using the supplied self tapping screw.
What’s included
A 4 pin connector, dust cap and ground wire with self tapping screw are listed.
Not included: the factory harness, which the connectors plug into.









