Overview
The Curt Manufacturing CRT56225 is a 2-wire wiring T-connector for several Nissan and Suzuki models. It fits the 2005–2019 Nissan Frontier, 2005–2015 Nissan Xterra, 2005–2010 Nissan Pathfinder and 2009–2012 Suzuki Equator. It is intended for vehicles without a factory tow package and has an install time of 30 minutes.
Key features
- 2-wire system
- Plugs into the factory harness
- For vehicles without a factory tow package
- 4-pin connector, dust cap and ground wire
- Install time listed at 30 minutes
Choosing the right setup
A factory tow package usually includes its own wiring and connector, so a T-connector suits vehicles that lack that equipment. Before starting, confirm whether the truck already has tow harness wiring, because a second connection can complicate troubleshooting. Trailer lighting, brake controller wiring and the trailer plug are separate circuits, and each should be checked on its own.
Once installed, inspect the 2-wire connection every time the trailer is unhooked. Look for pinched wires, cracked insulation and loose ground screws. Corrosion at the ground point is a common cause of dim trailer lights, and cleaning the metal surface often restores a solid connection. Replace the connector if the plug housing is cracked or the pins look burned.
- Check for existing tow wiring before buying
- Inspect the ground point after each trip
- Replace cracked or corroded connector housings
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT56225 |
| Wiring system | 2-wire |
| Applies to | Vehicles without factory tow package |
| Install time | 30 min |
| Included | 4-pin connector, dust cap, ground wire with self-tapping screw |
Vehicle fitment
It fits the 2005–2019 Nissan Frontier in Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV and XE trims; the 2005–2015 Nissan Xterra in Off-Road, PRO-4X, S, SE and X trims; the 2005–2010 Nissan Pathfinder in LE, S, SE, SE Off-Road and XE trims; and the 2009–2012 Suzuki Equator in Base, Premium, RMZ-4 and Sport trims.
Pathfinder years after 2010 and Equator years outside 2009–2012 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The listed install time is 30 minutes. The connector plugs into the factory harness, and the ground wire is attached with its supplied screw.
What’s included
The package includes a 4-pin connector, a dust cap and a ground wire with a self-tapping screw.









