Overview
The Curt Manufacturing 56515 is a 5-flat wiring T-connector with a 2-wire system, designed to plug directly into the factory harness on many GM, Ford, Jeep, Ram, Nissan, Toyota and Honda vehicles. Fitment is listed from 2014 to 2019, and Curt gives an install time of 5 min.
The kit includes a 4 pin connector, a dust cap and a ground wire with a self-tapping screw. Fitment covers many vehicles, so the vehicle fitment section below groups them by make and model.
Key features
- 5-flat wiring T-connector
- 2-wire system
- Plugs directly into the factory harness
- 4 pin connector included
- Dust cap and ground wire with self-tapping screw included
- Install time 5 min.
Matching the harness to the truck
A 2-wire T-connector ties into the factory harness at one point, so the match between the connector and the vehicle matters more than the part itself. Before buying, check that the harness plug style matches the vehicle’s wiring, and compare the year range against the vehicle’s build. Connector style and wire system are both worth comparing, since a mismatch can leave some functions dead.
On vehicles with many shared wiring layouts, one part can fit several models, but each application still depends on the factory harness. Inspect the pins, housing and ground screw during routine checks. Off-road use puts extra strain on connections, so check after rough trips and replace any housing that cracks or loosens.
- Compare the harness plug style with the vehicle
- Check the ground screw after rough trips
- Replace cracked or loose connector housings
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT56515 |
| Connector style | 5-flat |
| Wire system | 2-wire |
| Connector | 4 pin |
| Included | Dust cap, ground wire with self-tapping screw |
| Install time | 5 min. |
| Fitment | Direct fit |
Vehicle fitment
The manufacturer fitment list covers these vehicles, all within model years 2014 to 2019: Audi Q7 (2017); Buick Enclave (2015 and 2017–2019); Cadillac Escalade, Escalade ESV and XT5; Chevrolet Colorado, Equinox, Silverado 1500, Silverado 2500 HD, Silverado 3500 HD, Suburban, Suburban 3500 HD, Tahoe and Traverse; Dodge Durango (2017); Ford Expedition, Expedition EL, Explorer, Explorer Sport, F-150, F-250 Super Duty, F-350 Super Duty, Flex and Police Interceptor Utility; GMC Acadia, Acadia Limited, Canyon, Sierra 1500, Sierra 2500 HD, Sierra 3500 HD, Terrain, Yukon and Yukon XL; Honda Pilot and Ridgeline; INFINITI QX60 and QX80; Jeep Cherokee, Grand Cherokee (WK) and Wrangler (JK and JL); Lincoln Navigator and Navigator L; Nissan Armada, Frontier, Pathfinder, Titan and Titan XD; Ram 1500, 1500 Classic, 2500 and 3500; and Toyota 4Runner, Sequoia, Tacoma and Tundra.
Years outside these ranges aren’t covered, such as the 2013 Chevrolet Silverado 1500 and the 2020 Ford F-150. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install time is 5 min. Pick a clean bare metal spot for the ground wire, and disconnect the battery before starting on the factory wiring.
What’s included
A 4 pin connector, a dust cap and a ground wire with a self-tapping screw.
Not included: the factory-fitted harness on the vehicle, which this T-connector is designed to tap.









