Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 1153–1164 of 3453 resultsSorted by popularity
-
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999758
- Rancho RS999758 RS9000XL Series shock absorber
- 2.75-in. (70mm) body with an 18mm chrome rod
- Nitrogen charge, liquid metallic finish, polyurethane bushings
- Protective boot included
- Fitment: Direct Fit with no vehicle named
SKU: RANRS999758 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999384
- Rancho RS999384 RS9000XL Series rear shock absorber
- Fits 2009–2018 Ford F-150 in FX4, King Ranch, Lariat, XLT and other trims
- 2.75-in. (70mm) liquid metallic body with 18mm Nitro Carb rod
- 9-position tuning and gas charged design
- 0 in. lift/drop
SKU: RANRS999384 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999381
- Rancho RS999381 RS9000XL Series rear shock absorber
- Fits 2011–2017 Silverado and Sierra 2500 HD, and 2011–2016 3500 HD trucks
- 3 to 4 in. lift range
- 2.75-in. (70mm) body, 18mm Nitro Carb rod, gas charged
- 9-position tuning and protective boot included
SKU: RANRS999381 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999380
- Rancho RS999380 RS9000XL Series front shock absorber
- Fits 2011–2017 Silverado and Sierra 2500 HD, plus 2011–2014 and 2016 3500 HD trucks
- 4 in. lift height, gas charged remote reservoir design
- Eye-to-eye upper and lower mounts, mountable in any position
- 9-position manual knob at the shock
SKU: RANRS999380 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999379
- Rancho RS999379 RS9000XL Series rear shock absorber
- Fits 2011–2018 Silverado and Sierra 2500 HD and 3500 HD trucks in selected years
- Lift range 0 to 1.25 in.
- 2.75-in. liquid metallic body, 18mm rod, 9-position tuning
- UPC 10039703003794
SKU: RANRS999379 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999377
- Rancho RS999377 RS9000XL Series front shock absorber
- Fits 2011–2018 Chevrolet Silverado and GMC Sierra 2500 HD, plus selected 3500 HD, Sierra 1500, Acadia, Terrain and Yukon models
- 2.75-in. (70mm) body with 18mm Nitro Carb rod
- 9-position tuning and gas charged design
- Protective boot included
SKU: RANRS999377 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999368
- Rancho RS999368, a 2.75 in. RS9000XL Series shock absorber
- 18mm piston rod with fade-resistant hydraulic fluid.
- Designed to work with the myRide 9-position adjustable tuner
- Direct Fit to the RS9000XL Series; no vehicle years given
- UPC 10039703001127
SKU: RANRS999368 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999367
- Rancho RS999367 RS9000XL Series rear shock absorber
- Fits 2009–2010 Dodge Ram 1500 and 2011–2018 Ram 1500 (multiple trims)
- 2.75-in. (70mm) body diameter and 18mm Nitro Carb rod
- 9-position tuning compatible with the My Ride adjustable ride tuner
- Gas charged with protective boot included
SKU: RANRS999367 -
Shock Absorbers
Rancho RS9000XL Series Strut Assembly – RS999365
- Rancho RS9000XL rear strut assembly, part number RS999365
- Fits 2001–2003 Mitsubishi Montero and Montero Sport per fitment list
- Nine-position manual and remote tuning system
- Without electronic adjustable suspension
- Protective boot included, Limited Lifetime Warranty
SKU: RANRS999365 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999363
- Rancho RS999363 rear RS9000XL Series shock absorber
- Fitment list names the 1999–2000 Land Rover Range Rover
- 2.75-in. (70mm) body, 18mm Nitro Carb rod, nitrogen gas charged
- Pairs with My Ride 9-position tuning
- Protective boot included
SKU: RANRS999363 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999362
- Rancho RS999362 front RS9000XL Series shock absorber
- Fitment list covers the 1999–2000 Land Rover Range Rover in several trims
- 2.75-in. (70mm) body with 18mm Nitro Carb rod
- Works with the My Ride 9-position adjustable ride tuner
- Protective boot included
SKU: RANRS999362 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999359
- Rancho RS999359 rear RS9000XL Series shock absorber
- Fitment list names the 1998–2002 Toyota Land Cruiser in the Base trim
- 2.75-in. (70mm) body with 18mm Nitro Carb rod
- 9-position tuning designed to work with My Ride
- Nitrogen gas charged with polyurethane bushings
SKU: RANRS999359
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.















