Overview
The Pro Comp ES9000 Series front shock absorber, part number 917517, fits 1997 to 2002 Ford Expedition models. It measures 17.08 inch extended and 10.58 inch collapsed, giving 6.50 inch of travel. It is rated for 2 to 3 in. of lift.
The shock uses factory upper and lower mounts. It is a twin-tube, gas-charged design with 10-stage velocity-sensitive valving and a nylon-banded piston head. The double-welded mounts are built for strength and durability.
Key features
- Twin-tube, gas-charged design.
- 10-stage velocity-sensitive valving.
- A nylon-banded piston head.
- Double-welded shock mounts.
- Factory upper and lower mounts.
Lift height and shock length
A longer lift changes how far the suspension travels, which is why the shock’s extended length matters as much as its damping. When the front end is raised, the shock must reach further at full droop without running out of stroke at full compression. Trucks with bigger tires or added weight may use the travel more often, so pay attention to how the shock feels on uneven terrain.
Lift also changes related parts. Brake hoses, sway bar links and CV angles may need checking after a lift, and a shock that sits differently can change the position of the upper mount under the frame. Replacing front shocks in matched sets keeps damping consistent between the two sides. If the truck runs a different spring height than the shock was rated for, check the fit before the first drive.
- Check brake hose length after lifting
- Inspect sway bar links for wear
- Replace front shocks in matched sets
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 917517 |
| UPC | 614901117974 |
| Shock series | ES9000 |
| Extended length | 17.08 inch |
| Collapsed length | 10.58 inch |
| Travel length | 6.50 inch |
| Upper mount | Factory |
| Lower mount | Factory |
| Position | Front |
| Lift rating | 2 to 3 in. lift |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
It is a front-position shock for 1997 to 2002 Ford Expedition models, rated for 2 to 3 in. of lift. Other Expedition years and the Navigator are not covered.
The list covers only the first-generation Expedition years shown, so the Expedition from 2003 onward and the Navigator are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
At a 2 to 3 in. lift the shock runs longer than a stock replacement, so measure the front ride height on your Expedition and compare it with the 17.08 inch extended length before ordering.
What’s included
One ES9000 front shock absorber.
Not included: a dust boot.











