Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 1717–1728 of 3453 resultsSorted by popularity
-
Shock Absorbers
Icon Suspension V.S. 2.5 Series Piggyback Reservoir CDCV Shock Set – 217715CP
- Icon Suspension V.S. 2.5 Series rear shock, part 217715CP, sold in pair
- Fits Dodge and Ram 1500 trucks in the listed 2009–2017 trims
- Piggyback reservoir with 10 levels of CDC compression damping
- Designed for 0 to 3 inches of lift
SKU: ICO217715CP -
Shock Absorbers
Icon Suspension 2 – 3 Inch Rear 2.5 VS Piggyback Reservoir Shock Kit – 217701P
- 2-3 inch 2.5 VS piggyback reservoir shocks for the 2003-2010 Dodge Ram 2500/3500 and 2011-2013 Ram 2500
- Sold as a pair with all required hardware
- Gas charged; rebuildable and revalveable
- Part number 217701P
SKU: ICO217701P -
Shock Absorbers
Icon Suspension 2.0 Aluminum Series Rear Shock Absorber – 216532
- Rear air ride shock for 2014–2017 Ram 2500 trucks per listed fitment
- Icon Suspension part number 216532, V.S. 2.0 aluminum series
- Nitrogen charged monotube with internal reservoir
- Rebuildable and revalveable, with 5/8 in chrome plated steel shaft
SKU: ICO216532 -
Shock Absorbers
Icon Suspension 2.0 Aluminum Series Front Shock – 216530
- Front shock for 2014–2017 Ram 2500 and 2013–2017 Ram 3500 trucks with a 4.5 inch lift
- Icon Suspension part number 216530, V.S. 2.0 aluminum series
- Nitrogen charged monotube with internal reservoir
- Rebuildable and revalveable, with 5/8 in chrome plated steel shaft
SKU: ICO216530 -
-
Shock Absorbers
Icon Suspension 2.5 Inch Front 2.0 Remote Reservoir Aluminum Shock – 216521R
- Front 2.0 Remote Reservoir Aluminum Series shock, part 216521R
- Fits Ram 2500 and 3500 trucks from 2003 to 2013, by year and trim
- Remote reservoir design with all required hardware
- Sold individually
- UPC 700006854571
SKU: ICO216521R -
-
Shock Absorbers
Coilover Kit
- Icon Suspension 211000 adjustable coilover kit with 2.5 inch shock diameter
- Race shock piston with flutter stack compression valving
- Billet aluminum upper mount and forked lower mount
- Nitro-steel shaft and completely re-buildable design
- Fitment not listed; confirm before ordering
SKU: ICO211000 -
Shock Absorbers
Icon Suspension Front 3.0 VS Series Coilover Reservior Shock Absorber – 95002
- Icon Suspension Front 3.0 VS Series coilover reservoir shock, part 95002
- Fits the 2017–2018 Ford F-150 Raptor per the manufacturer list
- Adjustable 1 to 3 inch front lift height with a 10 setting CDC valve
- 10 inch finned aluminum reservoirs and 1 inch CNC machined shafts
SKU: ICO95002 -
Shock Absorbers
Icon Suspension V.S. 2.5 Series Remote Reservoir Coilover Shock Absorber Set – 91816
Shock AbsorbersIcon Suspension V.S. 2.5 Series Remote Reservoir Coilover Shock Absorber Set – 91816
- Icon V.S. Series front coilover shock for 2015–2017 Ford F-150 2WD
- Adjustable 1.75 to 3 inch lift height with a 2.5 inch remote reservoir
- Sold as a set with bolt-on installation
- Icon engineered coil springs and a 7/8 inch induction hardened shaft
SKU: ICO91816 -
Shock Absorbers
Icon Suspension V.S. 2.5 Series Piggyback Reservoir Shock Absorber Set – 87705P
- Fits the 2016–2017 Nissan Titan XD, 0-1.5 inch lift
- V.S. 2.5 Series shocks with vehicle specific valving
- 7/8″ chrome plated shaft, 6061 aluminum components
- Sold as a set; position listed inconsistently (front and rear)
SKU: ICO87705P -
Shock Absorbers
V.S. 2.0 Aluminum Series Shock Absorber
- Icon Suspension V.S. 2.0 Aluminum Series rear shock, part 86535
- Fits the 2016–2017 Nissan Titan XD in the listed trims
- Gas charged monotube with a 5/8 inch chrome plated hardened steel shaft
- Driver or passenger side; sold individually
SKU: ICO86535
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.





