Overview
The Pro Comp ES9000 Series shock absorber, part number 917553, uses factory upper and lower mounts. Its extended, collapsed and travel lengths vary by vehicle, so the shock needs to be matched to the truck before it is ordered.
The design is a gas-charged twin-tube shock with 10-stage velocity-sensitive valving. The piston head is a 1 3/8 nylon-banded full-displacement design, and the double-welded mounts are built for strength and durability.
Key features
- Twin-tube, gas-charged design.
- 10-stage velocity-sensitive valving.
- A nylon-banded piston head.
- Double-welded shock mounts.
- Factory upper and lower mounts.
Matching a shock to your truck
When a part number has vehicle-specific lengths, the shock itself is only half of the match. The truck’s mounting points, the spring height and the bump stops decide how much stroke is usable. Start by measuring the original shock from center to center at both mounts, fully extended and fully compressed, and write the figures down before shopping.
Next, check the rest of the suspension. Look at frame and body clearance at full compression, and at the brake lines and any sway bar links the shock may pass near. If the old shock has been replaced before, the previous owner may have used a different length, so inspect for rubbing marks on the body or frame. A shock that binds at either end will wear its bushings quickly and feel harsh on the road.
- Measure center to center at both mounts
- Note any rubbing marks on the body
- Check bump stop condition
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 917553 |
| UPC | 614901115819 |
| Shock series | ES9000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Before buying, match the year, model and trim to your truck. Measure the shock being replaced and compare its length with the mounting points.
Vehicle-specific lengths mean the same shock number can fit differently across trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the factory mounts to position the shock, then check its full compression and extension against the body and frame.
What’s included
One ES9000 shock absorber.
Not included: a dust boot.






