Overview
The Pro Comp ES9000 Series shock absorber, part number 917580, uses factory upper and lower mounts. It measures 17.55 inch extended and 11.05 inch collapsed, which gives 6.50 inch of travel. Confirm fit for your vehicle’s year, model and trim before ordering.
The design is a gas-charged twin-tube shock with 10-stage velocity-sensitive valving. The piston head is a 1 3/8 inch nylon-banded full-displacement design, the double-welded mounts add durability, and the shock is non-adjustable.
Key features
- Twin-tube, gas-charged design.
- 10-stage velocity-sensitive valving.
- A 1 3/8 inch nylon-banded piston head.
- Double-welded shock mounts.
- Factory upper and lower mounts.
Lift and length considerations
Suspension lift changes how far a shock must reach at full extension and how much it compresses at rest. A shock that is too short can bottom out or pull on its mounts, while one that is too long can contact the bump stop early. Matching the length to the lift you actually run is the main check before installing.
Longer shocks also affect the parts around them. Brake lines, wiring and the steering linkage should clear the body at both full extension and full compression. Replacing worn bushings at the same time helps the new unit sit where it was designed to work.
- Measure the original shock’s extended length
- Check brake line and wiring clearance
- Inspect bump stops before installing
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 917580 |
| UPC | 614901118612 |
| Shock series | ES9000 |
| Extended length | 17.55 inch |
| Collapsed length | 11.05 inch |
| Travel length | 6.50 inch |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the 17.55 inch extended length with the shock you are replacing.
Confirm the length and lift range suit your truck before ordering.
Installation notes
Check the factory mounts and the full compression of the shock before installing it, and compare the 17.55 inch extended length with the original.
What’s included
One ES9000 shock absorber.
Not included: a dust boot.






















