Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 1141–1152 of 3453 resultsSorted by popularity
-
Shock Absorbers
Rancho RS9000XL Series Strut Assembly – RS999830
- Rancho RS9000XL front strut assembly, part number RS999830
- Fits 2014–2018 Chevrolet Silverado 1500 and GMC Sierra 1500
- Fits 2017–2018 Chevrolet Suburban and Tahoe
- Nine-position manual and remote tuning system
- Protective boot included, Limited Lifetime Warranty
SKU: RANRS999830 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999808
- Fits 2009–2010 Dodge Ram 1500 (Laramie, SLT, ST, Sport)
- Fits 2011–2018 Ram 1500 across the listed trims
- Front RS9000XL shock absorber, part RS999808
- Liquid metallic 2.75 in. body with 18mm piston rod
- Works with the myRide 9-position adjustable tuner
SKU: RANRS999808 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999799
- Fits 2007–2013 Chevrolet Avalanche (Black Diamond and standard LS, LT, LTZ trims)
- Fits 2007–2014 Chevrolet Suburban 1500, Tahoe, GMC Yukon and Yukon XL 1500
- Front RS9000XL shock absorber, part RS999799
- 2.75 in. (70mm) body with 18mm chrome rod
- 9-position tuning, gas charged
SKU: RANRS999799 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999787
- Fits 2005–2012 and 2014–2017 Nissan Frontier (Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV, XE)
- Fits 2005–2012 Nissan Pathfinder and 2005–2012 and 2014–2015 Nissan Xterra
- Front RS9000XL shock absorber, part RS999787
- 2.75 in. (70mm) body with 18mm chrome rod
- Gas charged with 9-position tuning
SKU: RANRS999787 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999786
- Fits 2007–2013 Chevrolet Avalanche and Silverado 1500, 2007–2012 and 2014 Chevrolet Suburban 1500 and Tahoe
- Also fits 2007–2013 GMC Sierra 1500, 2007–2012 and 2014 GMC Yukon, and 2007–2014 GMC Yukon XL 1500
- Front RS9000XL shock absorber, part RS999786, UPC 10039703097861
- 2.75 in. (70mm) body with 18mm chrome rod
- Nitrogen gas charged with 9-position tuning
SKU: RANRS999786 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999784
- Rancho RS9000XL front shock RS999784 for 2007-2014 Chevrolet Silverado 1500, Tahoe, Suburban, Avalanche and GMC Sierra, Yukon models
- 9-position tuning technology, 2.75 in. (70mm) body
- 18mm Nitro Carb rod, nitrogen gas charged, polyurethane bushings
- Protective boot included
SKU: RANRS999784 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999777
- Fits 2003–2004 and 2016 Toyota 4Runner (Limited, SR5, Sport, TRD Pro, Trail)
- Fits 2005–2018 Toyota Tacoma (Base, Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport)
- Front RS9000XL shock absorber, part RS999777, gas charged
- 2.75 in. (70mm) body with 18mm chrome rod
- 9-position manual or remote tuning
SKU: RANRS999777 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999773
- Rancho RS999773, a gas-charged RS9000XL Series shock absorber
- Nine-position manual or remote tuning through myRide
- 2.75 in. (70mm) liquid metallic body with an 18mm chrome rod
- Protective boot included
- Direct Fit marking; no vehicle years, makes or models given
SKU: RANRS999773 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999767
- Rancho RS999767 RS9000XL Series front shock absorber
- Fits 2004–2008 Ford F-150 and 2006–2008 Lincoln Mark LT (Base)
- 18mm chrome rod and 2.75-in. (70mm) body
- 9-position myRide manual or remote tuning
- Gas charged with protective boot included
SKU: RANRS999767 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999766
- Rancho RS999766 RS9000XL Series front shock absorber
- Fits 2000–2006 Toyota Tundra (Base, Limited, SR5)
- 18mm chrome rod and 2.75 in. body diameter
- 9-position myRide manual or remote tuning
- Gas charged with protective boot included
SKU: RANRS999766 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999763
- Rancho RS999763 RS9000XL Series front shock absorber
- Fits 1996–2002 Toyota 4Runner and 1995, 2003–2004 Toyota Tacoma
- Red urethane bushings and 18mm chrome rod
- 2.75 in. body with liquid metallic finish
- myRide 9-position manual or remote tuning, protective boot included
SKU: RANRS999763
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.















