Overview
The Pro Comp ES9000 Series front shock absorber, part number 915580, uses factory upper and lower mounts and is rated for 0 in. of lift or drop. It measures 15.5 in. extended and 10.17 in. collapsed. The lengths are vehicle specific, so measure the original shock before ordering.
The shock is a twin-tube, gas-charged design with 10-stage velocity-sensitive valving. The valving offers a smooth, comfortable ride and better off-road handling. The piston head is a 1 3/8 nylon-banded full-displacement design, and the double-welded mounts are built for durability.
Key features
- Twin-tube, gas-charged design.
- 10-stage velocity-sensitive valving.
- A nylon-banded full-displacement piston head.
- Double-welded shock mounts.
- Factory upper and lower mounts.
Measuring before you buy
Shock length is measured from the center of one mount to the center of the other, with the suspension at a known position. Compare the collapsed and extended figures with the original unit, because a shock that is too long can bind at full droop while one that is too short can bottom out early. Note the mount styles at both ends as well, since a factory eye may not match an aftermarket stud or loop.
Ride height matters too. A shock installed at the wrong length changes the suspension’s geometry and can affect steering feel and driveline angles. Measure the front ride height on the truck before removing anything, and mark the position of the original shock and bracket. Reinstalling the same way keeps the setup close to how the truck was designed.
- Record the factory mount styles
- Measure ride height before removal
- Check bump stops for clearance
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 915580 |
| UPC | 614901915587 |
| Shock series | ES9000 |
| Extended length | Vehicle specific (description gives 15.5 in.) |
| Collapsed length | Vehicle specific (description gives 10.17 in.) |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Position | Front |
| Lift rating | 0 in. lift or drop |
| Hydraulic / gas charged | Gas charged |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Before buying, compare the front shock being replaced with the lengths above.
Because the lengths are vehicle specific, check them against your truck’s front suspension before purchase. Match the year, model and trim to the truck before ordering.
Installation notes
Use the factory mounts as the reference point, then check the shock’s compressed and extended length against your front suspension before final tightening.
What’s included
One ES9000 front shock absorber.
Not included: a dust boot.












