Overview
The Pro Comp 918520 is a rear ES9000 Series gas charged shock absorber for older Nissan pickups and utility vehicles, sold individually. It covers the Nissan 520 and 521 pickups from 1968 to 1972, the Nissan 620 and 620 pickup from 1972 to 1979, the Nissan 720 from 1980 to 1986 and the D21 in 1986.
Pro Comp gives this shock a 0 to 1.5 inch lift range. The reference lengths are 18.59 inches extended and 11.70 inches collapsed, and the upper and lower mounts are both factory style. Measure the shock it replaces to confirm the length, since lengths vary by vehicle.
Key features
- Rear position for older Nissan pickups
- Gas charged twin tube body
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded piston head with double welded mounts
- Factory-style upper and lower mounts
Rear suspension on older trucks
Rear shocks on older pickups control the movement of leaf springs and the axle as the truck travels over uneven ground. Old rubber bushings and tired springs can allow the shock to rattle, so a fresh unit helps restore control to a worn rear end. Pay attention to the pinch bolts and eye hardware, which often loosen before the shock itself fails.
Because older trucks carry varied loads, the rear shock works through a wide range of compression. Replace both rear units together so the ride stays level and one side does not bounce differently. Clean the mounting studs before installing, and check the axle for signs of oil or looseness that could shorten the life of a new shock.
- Replace both rear shocks together
- Check eye bushings and pinch bolts
- Inspect leaf spring U-bolts for looseness
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 918520 |
| UPC | 614901070859 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | 18.59 in |
| Collapsed length | 11.70 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Lift range | 0 to 1.5 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It is a rear fit for the 1968 Nissan 520, the 1968 to 1972 Nissan 521 pickup, the 1975 to 1979 Nissan 620, the 1972 to 1974 Nissan 620 pickup, the 1980 to 1986 Nissan 720 and the 1986 Nissan D21.
Later Nissan Frontier and Hardbody models are not covered by this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock uses factory mounts, so it should go in at the original rear points. Because the lift range tops out at 1.5 inches, a higher-lift truck will need a different length.
What’s included
One rear shock absorber. Its boot is a separate purchase.










