Overview
The Pro Comp 918515 is a front ES9000 Series gas charged shock absorber with a twin tube body, sold individually. It is made for Ford Explorer, Explorer Sport, F-150, F-150 Lightning and Ranger trucks from 1995 to 2011, on setups with up to 3 inches of lift.
The shock measures 18.66 inches extended and 11.52 inches collapsed, which gives 7.14 inches of travel. Both ends use factory-style mounts, so it bolts to the stock mounting points of the vehicles it is made for. The 10 stage velocity sensitive valving offers a smooth ride with solid off-road control.
Key features
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts for long life
- Factory-style upper and lower mounts
Lift and ride height
Ride height decides how much of a shock’s travel you actually use. Once a front end is lifted, the shock sits at a longer working angle and can run closer to its limits on compression, so checking the lift against the rated range matters. Measure front height before and after installation, and check bump stop clearance at full compression to make sure the shock is not bottoming out.
Lift often comes with larger tires, a steering stabilizer or new control arms, and each change alters the load the shock carries. Worn ball joints and bushings can make a shock wear faster, so inspect them while the old unit is out. Keep the mounting hardware clean and confirm the eye bushings turn freely before tightening.
- Measure front height before and after lifting
- Check bump stop clearance at full compression
- Inspect ball joints and bushings during replacement
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 918515 |
| UPC | 614901070835 |
| Shock series | ES9000 |
| Position | Front |
| Extended length | 18.66 in |
| Collapsed length | 11.52 in |
| Travel length | 7.14 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Lift range | 0 to 3 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It is a front shock for the 1995 to 2001 Ford Explorer, the 1995 to 2000 Explorer Sport, the 1997 to 2003 Ford F-150 and F-150 Lightning from 1999 to 2003, and the 1998 to 2011 Ford Ranger.
Ford Bronco models and Explorer models from after 2001 are not on this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factory-style mounts mean the shock is meant to replace the stock unit at the original points. Check the lift on your vehicle, since the rated range tops out at 3 inches.
What’s included
One shock absorber, sold individually. The shock boot is not included.










