Overview
The Pro Comp ES9000 Series front shock absorber, part number 918501, uses factory upper and lower mounts and is rated for 0 to 2 in. of lift. It measures 18.59 in. extended and 11.70 in. collapsed. Its lengths are vehicle specific, so measure the original shock before ordering.
The shock is a twin-tube, gas-charged design with 10-stage velocity-sensitive valving. The valving is built for a comfortable highway ride and better off-road handling. The piston head is a 1 3/8 nylon-banded full-displacement design.
Key features
- Twin-tube, gas-charged design.
- 10-stage velocity-sensitive valving.
- A nylon-banded piston head.
- Double-welded shock mounts.
- Factory upper and lower mounts.
Clearance at full extension
A longer shock needs room to extend, and the front of a truck has several components in that path. Brake hoses, steering parts and the frame crossmember can all limit how far a shock may move. With the truck safely supported, raise the axle through its range and watch each component for contact before the truck is driven.
Shock travel also affects bump stops. If the shock reaches full extension before the suspension does, it can add strain to the upper mount and the shock body. Check the bump stops for wear, and replace any cracked or flattened stops. Trucks used on rough trails should have their shocks inspected regularly, since repeated impacts can loosen mounting hardware.
- Check brake hoses for stretch
- Inspect bump stops for cracks
- Retorque mounting hardware after rough use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 918501 |
| UPC | 614901070699 |
| Shock series | ES9000 |
| Extended length | Vehicle specific (description gives 18.59 in.) |
| Collapsed length | Vehicle specific (description gives 11.70 in.) |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Position | Front |
| Lift rating | 0 to 2 in. lift |
| Hydraulic / gas charged | Gas charged |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Before buying, compare the front shock being replaced with the lengths above.
The extended and collapsed lengths are vehicle specific, so check them against the shock being replaced for your application. Match the year, model and trim to your truck before ordering.
Installation notes
Because the shock is longer than many front units, confirm that its extended length clears the frame and brake lines at full extension before installing.
What’s included
One ES9000 front shock absorber.
Not included: a dust boot.












