Overview
The Pro Comp 918513 is an ES9000 Series gas charged shock absorber with a twin tube design, sold as a single unit. Its extended length is 18.66 inches and its collapsed length is 11.52 inches, which gives 7.14 inches of travel. Both the upper and lower mounts are factory style.
No fitment is given for this part number, so match it to your vehicle by mounting points and dimensions rather than by the product name. Verify the year, model and trim of your truck before you buy. The 10 stage velocity sensitive valving balances a comfortable daily ride with firm control on rough trails.
Key features
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
- Factory-style upper and lower mounts
Choosing a replacement shock
Replacing a shock absorber works best when the new unit matches the old one in three measurements: extended length, collapsed length and mount type. Measure eye center to eye center with the old shock fully stretched and fully compressed, and note the mount style at each end. Gas charged units hold their damping steady over long runs, but they still need the correct length to keep the suspension within its normal travel.
Shocks are usually replaced in pairs on the same axle so damping stays balanced from side to side. When the old units show oil seepage, a dented body or torn eye bushings, replace them rather than waiting for the ride to decline. Check the upper and lower hardware as well, since worn bolts and bushings can make a new shock feel loose.
- Measure both extended and collapsed lengths
- Match the mount style at each end
- Replace in pairs on the same axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 918513 |
| UPC | 614901070798 |
| Shock series | ES9000 |
| Extended length | 18.66 in |
| Collapsed length | 11.52 in |
| Travel length | 7.14 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Part 918513 has no vehicle fit recorded here. Measure the 18.66 inch extended and 11.52 inch collapsed lengths against the shock you would replace, and confirm your truck’s year, model and trim first.
Pro Comp’s other ES9000 shocks cover different vehicles and lengths, so do not assume this number fits the same models as a neighbouring part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The factory-style mounts mean the shock should go in at the stock mounting points. Compare the eye sizes and stud spacing against the old shock before you start.
What’s included
A single shock. The boot is not included with this part number.








