Overview
The Pro Comp ES9000 Series shock absorber, part number 917552, has a stem upper mount and a loop lower mount. It measures 17.08 inch extended and 10.58 inch collapsed, giving 6.50 inch of travel. Match the year, model and trim to your truck before buying.
The ES9000 is a gas-charged twin-tube shock with 10-stage velocity-sensitive valving. Its piston head is a 1 3/8 nylon-banded full-displacement design, and the double-welded mounts are built for strength. The shock is non-adjustable and finished in white.
Key features
- Twin-tube, gas-charged design.
- 10-stage velocity-sensitive valving.
- A nylon-banded piston head.
- Double-welded shock mounts.
- Stem upper mount and loop lower mount.
Mount styles and matching
Mount style is one of the first things to confirm, because a stem and loop combination is not the same as a factory eye at each end. Stem mounts usually clamp through a bushing and stud, while loop mounts take a bolt through an eye. Mismatched hardware can leave the shock rotating under load or pulling against the bracket, which is why a visual check of both ends matters before the truck is driven.
Installation shortcuts often cause trouble. Use the correct bushings and spacers, torque the fasteners to the factory specification in the service manual, and recheck them after the first drive. Inspect the bracket for cracks around the mounting holes, and replace any worn bushings at the same time. A fresh set of hardware costs little next to the time spent on a second install.
- Confirm stud and bushing sizes
- Check bracket welds for cracks
- Retighten after the first short drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 917552 |
| UPC | 614901118025 |
| Shock series | ES9000 |
| Extended length | 17.08 inch |
| Collapsed length | 10.58 inch |
| Travel length | 6.50 inch |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Before buying, match the year, model and trim to your truck. Check that the stem upper mount and loop lower mount match the shock being replaced.
The stem and loop mount combination is not common to every application, so confirm both mount styles on your truck. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the mount-to-mount distance on the truck at normal ride height, then confirm that the 6.50 inch travel covers the full range of suspension movement before installation.
What’s included
One ES9000 shock absorber.
Not included: a dust boot.












