Overview
The Pro Comp ES9000 Series shock absorber, part number 918504, uses factory upper and lower mounts. It measures 18.59 inch extended and 11.70 inch collapsed, giving 6.89 inch of travel. Match the truck’s year, model and trim to this shock before buying.
The ES9000 is a gas-charged twin-tube shock with 10-stage velocity-sensitive valving and a 1 3/8 inch nylon-banded full-displacement piston head. The double-welded mounts are built for strength and durability. The shock is non-adjustable.
Key features
- Twin-tube, gas-charged design.
- 10-stage velocity-sensitive valving.
- A 1 3/8 inch nylon-banded piston head.
- Double-welded shock mounts.
- Factory upper and lower mounts.
Travel and suspension fit
Travel is the distance a shock moves between its fully collapsed and fully extended lengths. More travel lets the suspension follow uneven ground without the tires losing contact, but only if the mounts and bump stops allow that movement. When comparing shocks, subtract the collapsed length from the extended length, then check the result against the travel the original suspension needs.
Valving controls how quickly the shock resists movement. A velocity-sensitive design adjusts resistance based on how fast the shaft moves, so slow motion like body roll is handled differently from sharp bumps. Because this shock is non-adjustable, damping changes come from replacing the unit, not turning a knob. For heavier loads or towing, a shock with a different valving setup may suit better.
- Compare collapsed length, not only extended
- Check bump stops for clearance
- Match mount style before installing
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 918504 |
| UPC | 614901070712 |
| Shock series | ES9000 |
| Extended length | 18.59 inch |
| Collapsed length | 11.70 inch |
| Travel length | 6.89 inch |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Before buying, check the year, model and trim against your truck. Compare the 18.59 inch extended length with the shock being replaced.
The 6.89 inch travel is longer than the travel on some other ES9000 numbers, so confirm the length matches your suspension. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the factory mounts at full extension and compression, since the shock’s length is the main fit check for a truck without a listed fitment.
What’s included
One ES9000 shock absorber.
Not included: a dust boot.







