Overview
The Pro Comp 918518 is a front ES9000 Series gas charged shock absorber for the 1980 to 1985 Toyota Pickup, sold as a single unit. It is rated for up to 2 inches of lift, which suits a small lift on a truck of this age.
The shock is 18.66 inches extended and 11.52 inches collapsed, giving 7.14 inches of travel. It uses a twin tube body with a nylon banded piston head, and the factory mounts at each end keep installation close to the original layout. Valving is 10 stage and velocity sensitive, so damping adjusts to the speed of suspension movement.
Key features
- Gas charged twin tube body
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
- Factory-style upper and lower mounts
Older truck suspension notes
Trucks from this era often have springs, bushings and mounts that have softened or sagged with age. A shock that is worn or mismatched can make the front end feel loose and cause uneven tire wear. Checking the condition of the surrounding parts is as important as choosing the shock itself.
Older front ends also tend to have more play in the steering and suspension joints. Replacing worn bushings and inspecting ball joints at the same time helps the new shock do its job. Keep the boot and seals clean, since older trucks are often driven on dusty or muddy roads.
- Check spring sag and bushing wear
- Inspect ball joints and tie rod ends
- Keep shock seals clean and dry
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 918518 |
| UPC | 614901070842 |
| Shock series | ES9000 |
| Position | Front |
| Extended length | 18.66 in |
| Collapsed length | 11.52 in |
| Travel length | 7.14 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Lift range | 0 to 2 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1980 to 1985 Toyota Pickup in the Base, DLX, DLX Turbo and SR5 versions.
Toyota Tacoma, 4Runner and later Pickup generations are not on this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the mounts are factory style, the shock is meant to replace the original unit at the same points. The rated lift range is 0 to 2 inches, so check the height of your front end before installing.
What’s included
One gas charged shock absorber with its factory-style hardware on the mounts. The boot is not supplied.










