Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 1117–1128 of 3453 resultsSorted by popularity
-
Shock Absorbers
Rancho 1.1 Inch Loaded QuickLIFT – RS999929
- Rancho RS999929 front right 1.1 inch Loaded QuickLIFT quick-strut
- Gas charged strut with coil spring and upper mount, fully assembled
- Adds ride height for tires up to 35 inches depending on application
- Nine adjustment positions, compatible with the myRIDE Wireless Controller
- Confirm fit for your year, model and trim before ordering
SKU: RANRS999929 -
Shock Absorbers
Rancho 2 Inch Loaded QuickLIFT – RS999928
- 2 inch Loaded QuickLIFT front strut, part number RS999928
- Fits 2007–2013 Chevrolet Avalanche and Suburban 1500
- Fits 2007–2014 Chevrolet Tahoe, GMC Yukon and Yukon XL 1500
- Coil spring and upper mount included
- Gas charged with 9 adjustment positions
SKU: RANRS999928 -
Shock Absorbers
Rancho 1.25 Inch Loaded QuickLIFT – RS999926
- Fits the 2007–2012 Ford Expedition and Expedition EL in selected trims
- Rancho RS999926, 1.25 inch Loaded QuickLift, rear right position
- Complete assembly with coil spring and upper mount
- 9 adjustable positions and myRIDE Wireless Controller compatibility
SKU: RANRS999926 -
Shock Absorbers
Rancho 1.25 Inch Loaded QuickLIFT – RS999925
- Fits 2007–2012 Ford Expedition and Expedition EL in the covered trims
- Rancho RS999925, 1.25 inch Loaded QuickLift front right quick-strut
- Fully assembled with coil spring and upper mount
- 9 adjustable positions, compatible with myRIDE Wireless Controller
SKU: RANRS999925 -
Shock Absorbers
Rancho 1.5 Inch Loaded QuickLIFT – RS999924
- 1.5 inch Loaded QuickLIFT, front right, part number RS999924
- Fits 2006–2010 Ford Explorer and 2006–2010 Mercury Mountaineer
- Strut, coil spring and upper mount supplied
- Gas charged with 9 adjustment positions
- Compatible with myRIDE Wireless Controller
SKU: RANRS999924 -
Shock Absorbers
Rancho 2.25 Inch Loaded QuickLIFT – RS999923
- Fits 2001–2007 Toyota Sequoia (Limited, SR5) and 2000–2006 Toyota Tundra (Base, Limited, SR5)
- Rancho RS999923 Loaded QuickLift front left quick-strut, 2.25 inch lift
- Includes coil spring, upper mount and strut, fully assembled
- 9 adjustable positions, compatible with myRIDE Wireless Controller
SKU: RANRS999923 -
Shock Absorbers
Rancho 2 Inch Loaded QuickLIFT – RS999922
- Passenger side (Front Right) Loaded QuickLIFT, part number RS999922
- 2 inch lift with coil spring and upper mount
- Fits 2005–2018 Nissan Frontier, 2005–2012 Pathfinder and 2005–2015 Xterra
- Gas charged with 9 adjustment positions
- Compatible with myRIDE Wireless Controller
SKU: RANRS999922 -
Shock Absorbers
Rancho 2.25 Inch Loaded QuickLIFT – RS999921
- Front right Loaded QuickLIFT, part number RS999921
- Fits 2004–2011 INFINITI QX56 and 2005–2015 Nissan Armada
- Also fits 2004–2015 Nissan Titan per the manufacturer list
- 2.25 inch lift with coil spring and upper mount
- Gas charged, 9 adjustment positions
SKU: RANRS999921 -
Shock Absorbers
Rancho 2.25 Inch Loaded QuickLIFT – RS999920
- Fits 2007–2018 Toyota Tundra per the manufacturer fitment list
- Front right position, 2.25 inch lift
- Gas charged quick-strut, delivered fully assembled
- Coil spring and upper mount included
- 9 adjustment positions, compatible with myRIDE Wireless Controller
SKU: RANRS999920 -
Shock Absorbers
Rancho 2.25 Inch Loaded QuickLIFT – RS999919
- Fits 2007-2018 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR and SR5 trims
- Rancho RS999919 front left 2.25 inch Loaded QuickLIFT quick-strut
- Gas charged strut with coil spring and upper mount, fully assembled
- Nine adjustment positions, compatible with the myRIDE Wireless Controller
- Designed for tires up to 35 inches depending on application
SKU: RANRS999919 -
Shock Absorbers
Rancho 1.25 Inch Loaded QuickLIFT – RS999915
- Fits the 2005–2018 Toyota Tacoma, per the manufacturer fitment list
- Rancho RS999915 1.25 inch front loaded QuickLIFT strut assembly
- Arrives fully assembled with coil spring and upper mount
- Gas charged, with nine adjustable ride positions
- Compatible with the Rancho myRIDE Wireless Controller
SKU: RANRS999915 -
Shock Absorbers
Rancho 1.75 Inch Loaded QuickLIFT – RS999914
- Pre-assembled front right strut with coil spring and upper mount
- Levels the front and removes the factory nose-down rake
- Nine adjustment positions, compatible with the myRIDE Wireless Controller
- Gas charged, 1.75-inch lift
- Pre-assembled front right strut for the 2003 to 2018 Toyota 4Runner and 2007 to 2014 FJ Cruiser
SKU: RANRS999914
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.













