Select your vehicle

Pro Comp ES9000 Series Shock Absorber – 918595

Pro Comp Suspension

Shop Ford Ranger Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front ES9000 Series gas charged twin tube shock
  • Fits Ford Explorer, Explorer Sport, Explorer Sport Trac, Ranger and Mercury Mountaineer models in the covered years
  • Extended length 18.59 in and collapsed length 11.70 in
  • Factory upper and lower mounts, white finish
  • Shock boot not included

Description

Overview

The Pro Comp 918595 is a front ES9000 Series gas charged shock absorber for Ford Explorer, Explorer Sport, Explorer Sport Trac, Ranger and Mercury Mountaineer models, sold individually. It is a direct replacement design, so the factory mounts line up with the original shock on the vehicles listed.

The reference lengths are 18.59 inches extended and 11.70 inches collapsed. The shock uses a twin tube body with a nylon banded piston head and 10 stage velocity sensitive valving. The lift on the fitment entries is 0 inches, so this shock suits a stock-height front end.

Key features

  • Gas charged twin tube design
  • 10 stage velocity sensitive valving
  • Nylon banded full displacement piston head
  • Double welded shock mounts
  • Factory-style upper and lower mounts

Stock-height front ends

A front shock on a stock-height truck works with the factory springs and control arms, so its job is to manage body motion and wheel control rather than lift. Keeping the unit near its original length preserves the suspension geometry the truck was built with. Look for cracked eye bushings and a dented body, both of which can change how the shock loads at the mounts.

Front shocks on these trucks often wear alongside the steering components. When replacing one, check the tie rod ends and ball joints, because play in those parts can make a new shock seem to fail early. Replace both fronts together so the steering and ride feel consistent from side to side.

  • Check eye bushings for cracks
  • Inspect tie rod ends and ball joints
  • Replace both front shocks together

Specifications

Brand Pro Comp Suspension
Part number 918595
UPC 614901918595
Shock series ES9000
Position Front
Extended length 18.59 in
Collapsed length 11.70 in
Travel length Vehicle specific
Upper mount Factory
Lower mount Factory
Gas charged or hydraulic Gas charged
Lift range 0 in
Adjustable No
Remote reservoir No
Finish White
Boot included No
Sold as Each

Vehicle fitment

It is a front shock for the 1995 to 2001 Ford Explorer, the 1995 to 2000 Explorer Sport, the 2001 to 2004 Explorer Sport Trac, the 1998 to 2011 Ford Ranger and the 1997 to 2001 Mercury Mountaineer.

Models outside these years, and the Ford Explorer generations after 2001, are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the mounts are factory style, the shock is meant to go in where the original unit was. Check the front height first, since the entry is for a 0 inch lift.

What’s included

One front shock absorber. The boot is not part of the sale.

SKU: EXP918595 Category:

Specification

Shipping weight 5.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Ford Explorer1995–2001Eddie Bauer, Expedition, Limited, Postal, XL, XL Fleet, XLS, XLT
Ford Explorer Sport1995–2000All
Ford Explorer Sport Trac2001–2004Base, XL, XLS, XLT
Ford Ranger1998–2011Edge, FX4, Splash, Sport, Tremor, XL, XLT
Mercury Mountaineer1997–2001Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Pro Comp 918595 fit a 2003 Ford Explorer Sport Trac?

Yes. It is a front shock for the 2001 to 2004 Explorer Sport Trac, so a 2003 truck is included. Measure your current front shock to confirm the length before you buy.

What is the lift range of the 918595?

The lift range is 0 inches, so the shock is for stock-height front suspension. The extended length is 18.59 inches and the collapsed length is 11.70 inches.

Does the 918595 fit a Mercury Mountaineer?

Yes. The fitment entry includes the 1997 to 2001 Mercury Mountaineer that is listed with factory-style mounts like the Ford models.

Does a stock-height front end need a special shock?

No special shock is needed for stock height, but the unit should match the original length and mount style. Check that the shock does not bottom out at full compression and that the bushings are intact.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford Ranger Shock Absorbers on Amazon