Overview
The Pro Comp 918530 is a rear ES9000 Series gas charged shock absorber for the 1990 Daihatsu Rocky, sold as a single unit. It fits the SE and SX versions of the 1990 Rocky.
The shock measures 18.59 inches extended and 11.70 inches collapsed, which gives 6.86 inches of travel. Pro Comp rates it for a 0 to 1 inch lift, so it suits a Rocky that is close to stock height. The twin tube body has a nylon banded piston head, double welded mounts and 10 stage velocity sensitive valving.
Key features
- Rear position for the 1990 Daihatsu Rocky
- Gas charged twin tube body
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Stock height and lift limits
Rear shocks on compact off-road vehicles work hardest when the suspension is near its normal height. A shock sized for a stock ride gives controlled damping on washboard gravel and on pavement, while extra height changes the angle and the stroke it has to handle.
If you plan to raise the vehicle later, the shock is only one part of the change. Springs, bump stops and brake hose length can all need attention, and the damper should be sized to the new ride height rather than kept from the original setup.
- Keep the rear height close to stock for best damping
- Check bump stops when the ride height changes
- Inspect the rear mounts for cracks or play
- Replace leaking shocks in pairs on the same axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 918530 |
| UPC | 614901070897 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | 18.59 in |
| Collapsed length | 11.70 in |
| Travel length | 6.86 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Lift range | 0 to 1 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1990 Daihatsu Rocky in the SE and SX versions.
No other Daihatsu or Rocky years are covered by this part number. Check the year, model and trim against your vehicle before ordering.
Installation notes
The factory mounts keep the shock in the original rear position. The 0 to 1 inch lift range means it is best suited to trucks at or near stock height.
What’s included
Single rear shock, sold as each. No boot comes with it.












