Overview
The Pro Comp 918509 is a front ES9000 Series gas-charged shock absorber with a twin-tube design, sold individually. It fits older 4x4s, including Jeep CJ models from 1946 to 1981, the Jeep Commando, Jeepster and DJ models, the International Scout, Land Rover, Dodge W300, Toyota Land Cruiser and Willys MB.
With 18.59 inches extended and 11.70 inches collapsed, the shock gives 6.89 inches of travel. Both mounts are loop style. The 10 stage valving reacts to how quickly the shock moves, which is meant to keep highway driving smooth while still controlling the suspension off road.
Key features
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts for strength
- Loop-style upper and lower mounts
Loop mounts on older frames
Loop-style mounts on older 4x4s rely on the bracket and bushing to keep the shock aligned. Over decades, bushings harden and brackets can crack around the bolt holes, so inspect them before fitting a new shock. A loose mount lets the shock rock side to side, which wears the eye quickly and makes the front end feel vague on the trail.
Older frames often hide rust under undercoating. Scrape the mounting areas and check for thin metal before tightening anything. The shock’s extended and collapsed lengths should suit the suspension height of the truck, and an old spring pack that has sagged may leave less room than expected. Shock boots are sold separately, so decide early whether the truck needs one to keep grit out of the rod seal.
- Replace cracked loop bushings
- Check frame brackets for rust
- Decide on a boot before installing
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 918509 |
| UPC | 61490107076 |
| Shock series | ES9000 |
| Position | Front |
| Extended length | 18.59 in |
| Collapsed length | 11.70 in |
| Travel length | 6.89 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Gas charged or hydraulic | Gas charged |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Lift height | 0 in, lift or drop |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits Jeep CJ-2 through CJ7 models from 1946 to 1981, including the Willys CJ-3, CJ-5 and CJ-6 and the 1976 to 1981 CJ7 with Golden Eagle, Golden Hawk, Laredo and Renegade trims. It also fits the Jeep Commando, Jeepster, DJ-3 and DJ-6, the 1975 Wagoneer SJ, the International Scout (1961 to 1971), the Dodge W300 pickup (1961 to 1972), the Land Rover (1959 to 1974), the Toyota Land Cruiser (1967 to 1968), the Suzuki Samurai (1986 to 1995), the Nissan Armada (2005 to 2009) and the Willys MB (1941 to 1942).
Modern Jeep Wrangler, Cherokee and Grand Cherokee models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both ends use loop mounts, so the shock needs loop-style brackets or bushings at the axle and frame. Check that the collapsed and extended lengths suit your suspension height before installing.
What’s included
One shock, sold as each. Its boot is sold separately.












