No products in the cart.
-7%
Dana 44 Complete Assemblies
CORE 44 Rear Axle Assembly with 4.56 Ratio and ARB Air Locker
Availability:
Out of stock
$4,143.80 $4,439.99
Out of stock
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 1997-2006 Jeep TJ/LJ Wranglers. Utilizing the strongest and latest generation high pinion Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. The CORE 44 will accept stock Dana 44 ring and pinions, axle shafts and all aftermarket lockers.
- G2 Axle and Gear | Part Number: G/2C4TSR456AC5
- Wheel Bolt Pattern:5 On 4.5 Inches
- Traction Device:ARB Air Locker
- Fitment:Direct Fit
- Housing Type:97-06 Jeep TJ Dana 44
- Front Or Rear:Rear
- Axle Spline:30 Splines
- Gear Ratio:4.56
- Brakes:Reuse Factory
| Weight | 320.00 lbs |
|---|---|
| Dimensions | 65.00 × 42.00 × 20.00 in |
| brands |
Based on 0 reviews
Be the first to review “CORE 44 Rear Axle Assembly with 4.56 Ratio and ARB Air Locker”
You must be logged in to post a review.
Related products
-
Dana 44 Complete Assemblies
Dana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 4.10 Ratio – 10010455
Dana 44 Complete AssembliesDana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 4.10 Ratio – 10010455
- 2 and 4-door models
- 4.10 Genuine Spicer® Gears
- 5/16″ thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer® chromoly axle shafts
- Spicer Life Series® (SPL®) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer® performance gasket
- Selectable electronic locking differential (harness sold separately, part number D/S10021771)
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
SKU: D/S10010455 -
Dana 44 Complete Assemblies
G2 JK CORE 44 High Pinion Front Axle With 5.38 Ratio and 35 Spline ARB Air Locker Differential – C4JMFL538AP5
Dana 44 Complete AssembliesG2 JK CORE 44 High Pinion Front Axle With 5.38 Ratio and 35 Spline ARB Air Locker Differential – C4JMFL538AP5
- JK High Pinion Front with 5.38 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- 3 Degrees extra axle caster for 6in. and up lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: G/2C4JMFL538AP5 -
Dana 44 Complete Assemblies
5.13 Dana 44 Crate JK Front Axle Assembly
- 07-Current Wrangler JK, 2 and 4 door
- Dana 44
- 5.13 ratio
- Front
- Without brakes and brackets
- Electric locking differential
- Chromoly axle shafts for optimal strength and performance
- Thicker wall tubing for increased axle strength
- Spicer gearing
- Spicer SPL 1350 u-joints with triple lip seals and full-circle snap rings for ultimate protection and retention
SKU: D/S2018543-10 -
Dana 44 Complete Assemblies
Dana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 4.56 Ratio – 10010520
Dana 44 Complete AssembliesDana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 4.56 Ratio – 10010520
- 2 and 4-door models
- 4.56 Genuine Spicer® Gears
- 5/16″ thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer® chromoly axle shafts
- Spicer Life Series® (SPL®) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer® performance gasket
- Selectable electronic locking differential (harness sold separately, part number D/S10021771)
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
SKU: D/S10010520 -
Dana 44 Complete Assemblies
Dana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 5.38 Ratio – 10010742
Dana 44 Complete AssembliesDana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 5.38 Ratio – 10010742
- 07-Current Wrangler JK, 2 and 4 door
- Dana 44
- 5.38 ratio
- Front
- Electric locker
- 5/16 inch thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer chromoly axle shafts
- Spicer Life Series (SPL) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer performance gasket
- Selectable electronic locking differential
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
SKU: D/S10010742 -
Dana 44 Complete Assemblies
Dana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 5.13 Ratio – 10010522
Dana 44 Complete AssembliesDana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 5.13 Ratio – 10010522
- 2 and 4-door models
- 5.13 Genuine Spicer® Gears
- 5/16″ thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer® chromoly axle shafts
- Spicer Life Series® (SPL®) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer® performance gasket
- Selectable electronic locking differential (harness sold separately, part number D/S10021771)
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
SKU: D/S10010522 -
Dana 44 Complete Assemblies
G2 JK CORE 44 Front Axle With 4.56 Ratio and 35 Spline Auburn Ected Differential – C4JMFS456MP5
Dana 44 Complete AssembliesG2 JK CORE 44 Front Axle With 4.56 Ratio and 35 Spline Auburn Ected Differential – C4JMFS456MP5
- JK High Pinion Front with 4.56 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- Standard axle caster for 0-4 inch lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: G/2C4JMFS456MP5
There are no reviews yet.