Overview
The Dana Spicer 10010455 is an Ultimate Dana 44 front axle with a 4.10 ratio and a factory electric locker, built for 2007-2018 Jeep Wrangler JK models. It is a direct bolt-in unit, so the stock wheel ends stay in use.
Dana Spicer adds upgrades for durability on the trail and strength in daily use. The axle carries 4.10 Genuine Spicer gears and 5/16 inch thick axle tubes.
The Ultimate Dana 44 is built for serious off-road use, with upgrades for on-trail durability and daily strength. It is a direct bolt-in unit, so the stock wheel ends are reused, and the performance differential cover and gasket come in the package.
Key features
- Genuine Spicer 4.10 gears
- 5/16 inch thick axle tubes for added strength and rigidity
- Redesigned and thicker brackets
- Spicer chromoly axle shafts with Spicer Life Series 1350 u-joints
- Performance differential cover and Spicer performance gasket
- Selectable electronic locking differential, harness sold separately
Locker and gear oil care
An electric locker changes how the front axle delivers power, so it is worth knowing how the system behaves before the first trail run. A locking differential sends equal torque to both wheels, which helps when one tire lifts or loses grip. On pavement the locker is usually kept open, since locked wheels can scrub during tight turns.
Routine care matters more with a locker in the housing. Change the gear oil at the interval your use calls for, check the cover gasket for seepage, and look at the axle boots and u-joints after each trip. The locker needs its own wiring and switch, so confirm the harness is installed correctly before relying on it off road.
- Check gear oil level after the first few outings
- Inspect the cover gasket for seepage
- Keep the locker switch and wiring protected from rock strikes
- Look at u-joints and axle boots for grease loss
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 10010455 |
| UPC | 23913483708 |
| Position | Front |
| Housing | 07-up Jeep JK Dana 44 |
| Gear ratio | 4.10 |
| Traction | Factory electric locker |
| Brakes | Reuse factory |
| Locker harness | Part number D/S10021771, sold separately |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 07-up Jeep JK Dana 44 housing, which covers 2007 through the 2018 model year. It is a front axle.
It is a front axle only, and the Wrangler JL and Gladiator JT are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Ordering the locker harness, part number D/S10021771, is a separate step, since the electronic locker is not used without it.
What’s included
The axle assembly with its Spicer shafts, Spicer Life Series 1350 u-joints and performance differential cover.
Not included: the locker harness and the gear oil.










